537294
9
Zoom out
Zoom in
Previous page
1/40
Next page
GS 461
English
7
Do not allow the guide bar to
become jammed
Always be aware that the object to
be cut may move and other factors
may cause the cut to close and jam
the diamond abrasive chain
The object to be cut must be
secured and supported so that the
cut remains open during and after
cutting
Do not twist the guide bar in the cut
Working – abrasive cutting
Ensure sufficient water supply to
diamond abrasive chain – do not allow
diamond abrasive chain to run dry.
Always wet cut – regardless of the
material to be cut.
The diamond abrasive chain must be
guided straight in the cut, without
wedging. Never exert lateral pressure on
the diamond abrasive chain.
Do not use the diamond abrasive chain
for lateral grinding or scrubbing.
Do not use the starting throttle position
for cutting. Engine speed cannot be
controlled with the throttle trigger in this
position.
Examine the workplace. Avoid all
danger due to damaged piping or
electrical wiring.
The machine must not be used near
inflammable substances or gases.
Never use the machine to cut inside
pipes, metal troughs or other containers
unless you are absolutely sure that they
do not contain any volatile or
inflammable substances.
Never leave the machine unattended
with the engine running. Switch off the
engine before leaving the machine
(e. g., for a break).
Work calmly and methodically – only
with good lighting and visibility. Do not
endanger others – stay alert at all times.
Make certain that all parts of your body
are well clear of the extended range of
travel of the diamond abrasive chain.
Only pull concrete cutter out of the
object being cut with the diamond
abrasive chain running.
Only use concrete cutter for cutting not
for prying or shoveling away objects.
Always decide the cutting direction
before positioning the concrete cutter.
After that, do not change the cutting
direction. Avoid knocks and bumps with
the machine while in the cut – do not
drop the machine into the cut danger of
breakage!
If cutting performance begins to
deteriorate, check the sharpness of the
diamond abrasive chain, resharpen as
needed. To do this, briefly cut through
abrasive material, e. g., sandstone,
aerated concrete or asphalt.
When working above ground level:
Always use a lift bucket
Never use the machine while
standing on a ladder
Never use the machine in unsteady
locations
Never cut above shoulder height
Never use the machine with one
hand
Begin cutting with the concrete cutter at
full throttle.
At the end of the cut, the concrete cutter
is no longer supported by the cutting
attachment in the cut. The machine's
weight must be borne by the user – risk
of loss of control!
Keep water and sludge away from
electric cables - risk of electric shocks!
Vibrations
Prolonged use of the power tool may
result in vibration-induced circulation
problems in the hands (whitefinger
disease).
No general recommendation can be
given for the length of usage because it
depends on several factors.
002BA146 KN
2411BA003 KN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl GS 461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl GS 461 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl GS 461

Stihl GS 461 User Manual - German, Dutch, French, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info