537294
8
Zoom out
Zoom in
Previous page
1/40
Next page
GS 461
English
6
Ensure proper ventilation when working
in trenches, hollows or other confined
areas. Toxic fumes can kill!
If you feel sick, if you have a headache,
vision problems (e.g., your field of vision
gets smaller), hearing problems,
dizziness or inability to concentrate, stop
work immediately. Such symptoms may
be caused by an excessively high
concentration of exhaust emissions –
risk of accident!
No smoking when working with or near
the machine - risk of fire! Combustible
fuel vapor may escape from the fuel
system.
Examine the diamond abrasive chain
periodically at short intervals, check that
they are not cracked, chipped, check
also that there are no damaged or
missing segments, signs of overheating
(discoloration).
Never use diamond abrasive chains that
are cracked or have chipped segments.
Visit your servicing dealer.
In the event of noticeable changes in
cutting behavior (e. g., increased
vibration, reduced cutting performance),
stop work and eliminate the causes of
the changes.
Switch off the engine and wait until
the diamond abrasive chain is
stationary
Check condition and correct tension
of diamond abrasive chain
Ensure that the cutting blades are
sharp
Never touch the diamond abrasive chain
when the motor is running. If the
diamond abrasive chain becomes
jammed by an object, switch off the
engine immediately before attempting to
remove the object – risk of injury!
To change the diamond abrasive chain,
switch off the engine – risk of injury!
If the machine is subjected to unusually
high loads for which it was not designed
(e. g., heavy impact or a fall), always
check that it is in good condition before
continuing work – refer also to the
section "Before starting". Check the fuel
system for leaks and make sure the
safety devices are working properly.
Never continue using a power tool that is
not in perfect working order. Consult a
servicing dealer if in doubt.
Check for correct idling, so that the
diamond abrasive chain stops moving
when the throttle trigger is released.
Check and/or correct the idle setting
regularly. Have the machine repaired by
a STIHL servicing dealer if the diamond
abrasive chain continues to run
nevertheless.
Reactive forces
The most frequently occurring reactive
forces are pull-in and pushback.
Pull-in (A)
When the diamond abrasive chain on
the bottom of the guide bar –
overbucking – is jammed or encounters
a solid object, the concrete cutter may
suddenly be drawn forward to the
workpiece.
Pushback (B)
When the diamond abrasive chain on
the top of the guide bar – underbucking
is jammed or encounters a solid object,
the concrete cutter may suddenly be
driven straight back toward the operator.
Your power tool produces
toxic exhaust fumes as
soon as the engine is
running. These gases
may be colorless and
odorless and may contain
unburnt hydrocarbons
and benzene. Never run
the engine indoors or in
poorly ventilated areas,
even if your model is
equipped with a catalytic
converter.
2411BA001 KN
A
2411BA002 KN
B
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl GS 461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl GS 461 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl GS 461

Stihl GS 461 User Manual - German, Dutch, French, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info