537294

Stihl GS 461 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
GS 461
English
9
The water introduced is used to cool the
diamond abrasive chain and rinse the
cutting attachment, and for binding dust.
After finishing work, run the concrete
cutter for a few seconds with water and
at operating speed to rinse the cutting
attachment.
If the water pressure or water volume is
too low, this leads to significantly
increased wear and irreparable damage
to the cutting attachment – danger of
breakage!
Objects to be cut
– Must be fully supported
– Must be secured so it cannot roll or
slip off
– Must be prevented from vibrating
Severed parts
With openings, recesses, etc., the
sequence of the cuts is important.
Always make the last cut so that the
diamond abrasive chain does not
become jammed and so that the
operator is not endangered by the
severed or separated part.
If necessary, use wedges and if
necessary, leave small ridges that hold
the part that is to be separated in
position. Break these ridges later.
Before finally separating the part,
determine:
– how heavy the part is
– how it can move after separation
– whether it is under tension
When breaking out the part, do not
endanger assistants.
Plunge-cutting
Begin cutting with the concrete cutter at
full throttle.
1. Apply the lower portion of the guide
bar nose
2. Swing slowly into the plunge-cutting
position
3. Make the plunge cut very carefully
When making the plunge cut into
existing, narrower joints, proceed with
extreme care.
Cut in several passes
N Mark cutting line (A)
N Work along the cutting line. When
making corrections, do not tilt the
diamond abrasive chain, always
reposition it afresh
Sample applications
Use diamond abrasive
chain only with water.
Connect concrete cutter
to water supply network
(min. 1.5 bar).
3.
2411BA004 KN
1.
2.
A
2411BA005 KN
2411BA006 KN
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl GS 461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl GS 461 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl GS 461

Stihl GS 461 User Manual - German, Dutch, French, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info