52140
38
Zoom out
Zoom in
Previous page
1/54
Next page
At very low outside temperatures:
Allow engine to warm up
As soon as the engine runs:
Blip the throttle trigger
to disengage it from starting throttle
position -
Master Control lever will move
to normal operating position -
engine settles down to idling speed.
Disengage chain brake: Pull hand
guard toward front handle -
as shown in illustration -
Open throttle slightly -
warm up engine for short period.
If engine doesn’t start:
If you did not move the Master Control
lever to the “warm start” position n
quickly enough after the engine began to
fire,
the combustion chamber is flooded.
Press down the interlock lever and
set the Master Control lever to
“cold start”
Turn the twist lock above the rear
handle 90° counterclockwise and lift
off the shroud vertically.
Pull off the spark plug boot.
Unscrew and dry off the spark plug.
Set the Master Control lever to b
Crank the engine several times with
the starter to clear the combustion
chamber.
Refit the spark plug and connect
the spark plug boot -
reassemble all other parts
Set Master Control lever to
“warm start” even if engine is cold.
Now start the engine.
Fuel tank run until dry and then refueled
Pull starter rope several times
until fuel line is primed.
143BA022 KN
143BA043 LÄ
36 017, 018
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 018 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info