52140
40
Zoom out
Zoom in
Previous page
1/54
Next page
Clean the air filter when there is a
noticeable loss of engine power.
Press down the interlock lever and
set Master Control lever to
“Cold Start” l
Turn the twist lock above the rear
handle 90° counterclockwise
Lift off the shroud vertically.
Lift filter off vertically.
Wash filter element in a clean,
non-flammable cleaning solution
(e.g. warm soapy water) and then
dry.
Always replace a damaged filter
element.
Reinstall the filter.
Turn the bar over -
every time you sharpen the chain -
and every time you replace
the chain - this avoids one-sided
wear, especiallly at nose and under-
side of the bar.
Regulary clean
1 = oil inlet hole
2 = oilway
3 = bar groove.
Measure groove depth -
with scale on filing gauge*-
or in area used most for cutting on
Rollomatic bars -
Chain Chain Minimum
type pitch groove depth
Picco-Mini 3/8" 5.0 mm (0.20")
If groove depth is less than specified:
Replace the guide bar.
The drive link tangs will otherwise scrape
along the bottom of the groove - the
cutters and tie straps will not ride on the
rails.
* Special accessory
Cleaning Air Filter
143BA054 ST
143BA022 KN
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
Taking Care of Guide Bar
3
2
143BA055 KN
1
38 017, 018
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 018 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info