52140
37
Zoom out
Zoom in
Previous page
1/54
Next page
Pull the starter grip slowly with your
right hand until you feel it engage -
then give the grip a brisk strong pull
and push down the front handle
at the same time.
Do not pull out starter rope more
than 70 cm (about 28 in) -
it might otherwise break.
Do not let the starter grip snap back
- guide it slowly into the housing
so that the starter rope can
rewind properly.
If engine is new, pull starter grip
several times to prime the fuel line.
When engine begins to fire:
Move Master Control lever (3)
to n
and continue cranking -
as soon as engine runs,
immediately blip the throttle trigger
(4) -
the Master Control lever (3) will
move to the “run” position (5) #
and the engine settles down to
idling speed.
As the chain brake is still engaged, the
engine must be returned to idling speed
immediately to avoid damage to the
engine and chain drive (clutch).
Pull the hand guard back toward
the front handle: =
The chain brake is now
disengaged -
your saw is ready for operation.
Always disengage chain brake before
accelerating engine and before starting
cutting work. High revs with the chain
brake engaged (chain locked) will
quickly damage the powerhead and
chain drive (clutch, chain brake).
Observe safety precautions
Always check operation of chain
lubrication before starting work.
Shut down engine:
Move Master Control lever to b
143BA020 KN
3
4
5
0
STOP
143BA021 KN
143BA012 KN
017, 018 35
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 018 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info