52140
35
Zoom out
Zoom in
Previous page
1/54
Next page
The four positions of the
Master Control lever
To start the engine, move the lever to
the “cold start” position l (1) -
- do not use force.
If the Master Control lever is
in the “run” position # (3):
Press down the throttle
trigger interlock and move
the Master Control downward.
“Cold Start” position:
Choke shutter is closed -
throttle trigger is in starting-throttle
position.
This position is used to start a cold
engine.
As soon as engine begins to fire,
move the Master Control lever to
“Warm Start” position n (2):
Choke shutter is open -
throttle trigger is in starting-throttle
position.
If you leave the Master Control lever
in the “cold start” position,
the combustion chamber will flood
and stall the engine.
The Master Control lever must be in
“warm start” position to start a
warm engine. Also select this
position if the engine has been
running but is still cold.
The Master Control lever is locked
and can only be moved to the “run”
position (3) after squeezing the
throttle trigger.
- do not use force -
In the “warm start” position,
continue cranking after engine
begins to fire.
As soon as the engine runs,
immediately blip the throttle trigger
so that the Master Control lever
moves to the “run” position (3).
To shut down the engine:
Move the Master Control lever
upward to “STOP” position
$ b (4):
The stop contact should engage
the contact spring -
this cuts off the ignition system.
Only machines with easy start
system:
Press in the button to open the
decompression valve.
The valve closes automatically as
soon as the engine begins to fire.
For this reason the button should
be pressed in before each starting
attempt.
4
1
2
3
STOP
0
144BA020 KN
Information Before You Start
- don’t start yet -
Starting
143BA016 KN
017, 018 33
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 018 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info