Manual Stiga TORNADO 2198 H (page 61 of 112) (English, German, Dutch, French, Italian)

608471

Zoom out

Zoom in

1/112

31. Warning: Read the instructions before op-

erating the machine.

32. Warning: Disconnect the key and read the

instructions before carrying out any mainte-

nance or repair work.

33. Danger! Ejected objects: do not operate

without side discharge chute in place.

34. Danger! Ejected objects: Keep bystand-

ers away.

35. Danger! Machine rollover: Do not use this

machine on slopes greater than 10°.

36. Danger! Dismemberment: Make sure that

children stay clear of the machine all the

time when engine is running.

37. Danger of cutting yourself. Cutting

means in motion. Do not put hands or feet

near or under the opening of the cutting

means housing.

38. Warning! Keep away from hot surfaces.

2.4 REGULATIONS FOR TOWING

A kit for towing a small trailer is available on re-

quest. This attachment must be tted following

the instructions provided.

41. When using the towing kit, do not exceed

the recommended loads stated on the label

and follow the safety instructions.

NOTE The images corresponding to the texts

in chapters 3 et seq., can be found on pages iii et

seq. of this manual.

3. UNPACKING AND ASSEMBLY

For storage and transport purposes, some com-

ponents of the machine are not installed in the

factory and have to be assembled after unpack-

ing. Follow the instructions below.

IMPORTANT The machine is supplied without

engine oil or fuel. Before starting up the engine,

fill with oil and fuel following the instructions given

in the engine manual.

WARNING! Unpacking and completing

the assembly should be done on a flat and

stable surface, with enough space for mov-

ing the machine and its packaging, always

making use of suitable equipment.

3.1 UNPACKING

When unpacking the machine, take care to

gather all individual parts and ttings, and do

not damage the cutting-means assembly when

taking the machine o the pallet.

The standard packaging contains:

– the machine;

– the steering wheel;

– dashboard cover;

– the seat;

– the battery;

– the side discharge chute

– an envelope containing:

– the instruction manuals and documents,

– steering wheel assembly parts,

– nuts and bolts to assemble the seat and

the supplied side discharge chute

– the connection screws for the battery

cables

– 2 starter keys,

– 1 spare 10 A fuse.

NOTE To avoid damaging the cutting-means

assembly when getting the machine down from

the pallet, take it to the maximum height and be

very careful.

Hydrostatic transmission

– To make it easier to get the machine o

the pallet and to move it, the rear drive

disengage lever should be put in position

«B» (see 4.33).

Disposal of the packaging should be done in ac-

cordance with the local regulations in force.

3.2 FITTING THE STEERING WHEEL

• Steering wheel Type “I” (Fig. 3.1)

Put the machine on a at surface and straighten

the front wheels.

Mount the hub (1) on the shaft (2), making sure

that the plug (3) is correctly tted into the hub

seat.

Fit the dashboard cover (4) clicking the seven

fasteners into place.

Fit the steering wheel (5) onto the hub (1) with

the spokes directed towards the seat.

Fit the spacer (6) and fasten the steering wheel

in place using the screws supplied (7), in the

indicated order.

Fit the steering wheel cover (8) clicking the three

fasteners into place.

• Steering wheel Type “Il” (Fig. 3.2)

Put the machine on a at surface and straighten

the front wheels.

Mount the hub (1) on the shaft (2), making sure

that the plug (3) is correctly tted into the hub

seat.

How do you set it for mulching mode. I have no manual. It leaves a row of grass between blades at moment. Thanks. Submitted on 23-3-2018 at 03:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga TORNADO 2198 H in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga TORNADO 2198 H Manual

Product: