Manual Stiga TORNADO 2198 H (page 60 of 112) (English, German, Dutch, French, Italian)

608471

Zoom out

Zoom in

1/112

Intended use

This machine was designed and built to cut

grass.

The use of special attachments provided for

by the Manufacturer as original equipment or

which may be purchased separately, allows this

work to be done in various operating modes,

illustrated in this manual or the instructions that

accompany the single attachments.

Likewise, the intended use can be extended to

include other functions by applying supplemen-

tary attachments (if provided for by the Manu-

facturer), abiding by the restrictions and condi-

tions indicated in the instructions accompanying

the attachment.

User types

This machine is intended for use by consumers,

i.e. non-professional operators. The machine is

intended for “DIY” use only.

Improper use

Any other usage not in keeping with the above-

mentioned ones may be hazardous and harm

persons and/or damage things.

Examples of improper use may include, but are

not limited to:

– transporting people, children or animals on

the machine or on a trailer;

– towing or pushing loads without the use of the

specied attachment for towing;

– use of the machine for riding over unstable,

slippery, icy, stony, rough, marshy ground or

puddles that do not allow the consistency of

the ground to be assessed;

– using the cutting means on surfaces other

than grass.

– use of the machine for leaf or debris collec-

tion;

Improper use of the machine will invalidate the

warranty, relieve the Manufacturer from all li-

abilities, and the user will consequently be liable

for all and any damage or injury to himself or

others.

2.2 IDENTIFICATION LABEL AND

MACHINE COMPONENTS

(see gures on page ii)

1. Acoustic power level

2. CE conformity marking

3. Year of manufacture

4. Operating engine power and speed

5. Type of machine

6. Serial number

7. Weight in kg

8. Name and address of Manufacturer

9. Type of transmission

10. Article code

The example of the Declaration of Conformity is

provided on the penultimate page of the manual.

/–––/–––/–––/–––/–––/–––/–––/

Write the serial number of your machine (6)

here.

As soon as you have purchased the machine,

do not forget to write the identication numbers

(3 - 5 - 6) in the spaces on the last page of the

manual.

The machine is composed of a series of main

components that have the following functions:

11. Cutting-means assembly: this is the cas-

ing that houses the rotating cutting means.

12. Cutting means: these are what cut the

grass; the ns at the ends help convey the

cut grass towards the collector channel.

13. Side discharge chute: a safety device

to prevent objects drawn up by the cutting

means from being hurled by the machine.

14. Engine: this moves the cutting means and

drives the wheels. Its specications and

regulations for use are described in a spe-

cic manual.

15. Battery: provides the energy for starting

the engine. Its specications and regula-

tions for use are described in a specic

manual.

16. Driving seat: this is where the machine

operator sits. It has a sensor connected to

safety devices for detecting the presence of

the operator.

17. Warning and safety labels: these give re-

minders on the main regulations for working

in safety.

2.3 SAFETY REQUIREMENTS

Your machine should be used with due care and

attention. Therefore, labels have been placed

on the machine to remind you pictorially of the

main precautions to take during use. These

labels are to be considered an integral part of

the machine. If a label should fall o or become

illegible, contact your Retailer to replace it. Their

meaning is explained below.

How do you set it for mulching mode. I have no manual. It leaves a row of grass between blades at moment. Thanks. Submitted on 23-3-2018 at 03:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga TORNADO 2198 H in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga TORNADO 2198 H Manual

Product: