608756
28
Zoom out
Zoom in
Previous page
1/96
Next page
When work is finished
When work is finished:
release the engagement lever (1);
move the throttle lever to «STOP»;
move the rotor positioning lever to the «B» position
( 2.2).
Disconnect the spark plug cap (2) before storing the ma-
chine or doing any other jobs on it.
IMPORTANT - Routine and accurate maintenance is
essential in maintaining original machine safety and
performance levels.
Store the machine in a dry place.
1) Wear sturdy work gloves before cleaning, maintaining
or adjusting the machine.
2) Accurately wash the machine with water after each
use; remove debris and mud accumulated on the rotor
and on tines to prevent it drying and making the next re-
moval difficult.
3) Paint on the inner guard parts may come off over time
due to the abrasive action of clods removed; if this
happens, promptly touch-up paint with rust-proof paint
to prevent rusting that could corrode the metal.
4) If accessing the lower part is necessary, only tilt the ma-
chine on the side indicated in the engine manual, fol-
lowing the relevant instructions.
5) Do not drip petrol onto the plastic parts of the engine or
the machine to prevent damaging them and remove all
traces of spilt petrol immediately.The warranty does not
cover damage to plastic parts caused by petrol.
Regulating rotor engagement
The rotor must be engaged and disengaged at the centre
of the lever's stroke (1).
If the rotor is engaged and disengaged with the lever (1)
at stroke end, you need to adjust the cable.
Loosen the ring-nut (2) and work the ring-nut (3) to obtain
the best condition.
If you cannot obtain a good engagement and disengage-
ment condition, the operation must be carried out by a
qualified Service Centre or by your Dealer.
Replacing the rotor and the tines
This operation must be done by a qualified Customer
Service Centre or by your Dealer.
3.3
4.2
4. ROUTINE MAINTENANCE
4.1
Environmental protection should be a priority of consider-
able importance when using the machine, for the benefit
of both social coexistence and the environment in which
we live.
Try not to cause any disturbance to the surrounding
area.
Scrupulously comply with local regulations for the dis-
posal of waste materials.
Scrupulously comply with local regulations for the dis-
posal of packaging, deteriorated parts or any elements
with a strong environmental impact;this waste must not
be disposed of as normal waste, it must be separated
and taken to specified waste disposal centres where the
material will be recycled.
When decommissioning, do not pollute the environ-
ment with the machine, hand it over to a disposal cen-
tre, in accordance with the local regulations in force.
For any doubts or problems, please do not hesitate to
contact your nearest Customer Service Centre or Your
Dealer.
5. ENVIRONMENTAL PROTECTION
26
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SVP 40 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SVP 40 B in the language / languages: All languages as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info