The motor cultivator is provided with a special device called “FORK 3 POSITIONS”
On position 1 (free) the wheel turns free on the shaft in order to let the machine to move even if the engine is not working;
On position 2 (blocked) the wheel is working with the shaft, working as on motion, i.e. ready to start working, such position is the most common
used;
On position 3 (semi-differential unit) the wheel can perform about a half-turn turning on the shaft, in order to allow turns.
WARNING ! All the works on the fork must be performed when the engine is stopping .
The motorcultivator is delivered to destination, partially assembled in its own packaging, unless otherwise agreed.
Handlebar assembly Fix the handlebar (g. 3 part. 1) to the support (2) using screws (3) washers and nuts (4). Then x the support to
the chassis screwing down the screws and the washers (5 and 6) on both sides. ATTENTION: during the handlebar assembly the speed control and
accelerator cables have to be spread out.
Rotavators cover assembling Insert the expanding parts (part 1) at the bottom of the rotavators
(2) and x them with the screws (3) and the nut (4). Unscrew the 6 pcs. screws (5) on the frame seating. Please be careful about this operation and
leave the screws (6) xing the support (7) slightly turned out in order to allow an easier assembling. Then put the cover (8) in the right position and taking
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Stiga SILEX 103 B at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Stiga SILEX 103 B in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.
The manual is 1,74 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
