608750

Stiga SHT 600 Manual

23
Zoom out
Zoom in
Previous page
1/258
Next page
HOW TO START - STOP THE MOTOR /USING THE MACHINE
21
EN
in order to switch the motor on and keep it running.
The motor will stop if either switch is released.
STOPPING THE MOTOR (Fig. 2)
To stop the motor:
– Release the switches (5) and (6).
– FIRST unplug the extension lead (3) from the
mains socket (4) and THEN disconnect the
power cable (2) of the machine from the exten-
sion lead (3).
DANGER!   When the motor is switched o, 
a few sparks may be seen near the ventilation slots;
this is perfectly normal and does not damage the
tool in any manner.
STARTING THE MOTOR (Fig. 2)
Before starting the motor:
– Fasten the extension lead (1) to the cable clamp
on the rear handgrip.
– FIRST connect the power cable plug (2) to the
extension lead (3) and THEN plug the extension
lead into the mains socket (4).
– Remove the blade protection devices.
– Make sure the blade is not touching the ground
or any other object.
– Make sure the handgrip is locked in the centre
position.
To start the motor:
1. Hold the machine rmly with both hands.
2. Press the safety switch (5) and then the switch
(6).
DANGER! Both switches must be enabled
WARNING! For your safety and that of
others:
1) Do not use the machine without having
read the instructions carefully. Become
ac quainted with the controls and the pro-
per use of the machine. Learn how to stop
the motor quickly.
2) Only use the machine for its intended
use, that is “the cutting and trimming of
hedges, consisting in plants with small sized
branches”. Any other use may be danger-
ous and severly da ma ge the machine. Ex-
amples of improper use may include, but
are not limited to:
– general grass cutting and in particular,
near kerbs;
– chopping material for composts;
– pruning;
– using the machine for cutting non-plant
material;
– use of the machine by more than one
person.
3) Residual risks: even all the safety rule
are obeyed, there still can be a certain
residual risk, which cannot be excluded.
From the kind and construction of the tool
the foreseeable potential endangerments
can be:
– Contact with the unprotected cutting
teeth.
– Involve ngers or hands into the mov-
ing cutting blade.
– Unexpected, sudden movement of the
cutting blade.
– Thrown away of chips, it may damage
your eyes.
– Damage of the hearing, if no protection
of the ears is carried.s
4) Keep in mind that the operator or user is
re sponsible for accidents or hazards oc-
curring to other people or their property.
5) Always wear suitable clothing when using
the machine. Your dealer can provide you
with all the information on the most suit-
able accident-prevention devices to guar-
antee your safety.
6) Mow only in daylight or good articial
light.
7) Thoroughly inspect the whole work area
and remove anything that could be thrown
up by the machine or damage the cutting
de vice (branches, iron wire, hidden wir-
ing, etc.).
8) Prevent the cutting device from touching
the electric cable. Use the cable clamp
6. HOW TO START - STOP THE MOTOR
7. USING THE MACHINE
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SHT 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 600 in the language / languages: All languages as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info