Manual Stiga SHT 600 (page 25 of 258) (All languages)

608750

Zoom out

Zoom in

1/258

USING THE MACHINE / MAINTENANCE AND STORAGE 23

WARNING! For your safety and that of

others:

– After each use, disconnect the machine

from the mains and check for damage.

– Correct maintenance is essential to main-

tain the original eciency and safety of the

machine over time.

– Keep all nuts, bolts and screws tight to be

sure the equipment is in safe working con-

dition.

– Never use the machine with worn or dam-

aged parts. Damaged parts are to be re-

placed and never repaired.

– Only use original spare parts. Parts that are

not of the same quality can seriously dam-

age the equipment and compromise safety.

WARNING! During maintenance oper-

ations unplug the machine from the mains.

1. MOTOR COOLING

To avoid overheating and damage to the motor,

always keep the cooling air vents clean and free

of sawdust and debris.

2. MAINTENANCE AND SHARPENING

OF THE BLADE

WARNING! Periodically check that the

blades are not bent or damaged and that the

xed comb on the blade is intact.

Adjustment of the distance between blades is not

necessary, as this is predetermined by the manu-

facturer.

If the blades are used correctly, following all the

instructions provided, they will not require any

maintenance work and will not need sharpening.

It is necessary to sharpen the blades only when

the trimming performance decreases and the

branches tend to stick together.

NOTE

Any intervention on the blade

should always be conducted at a specialised Cen-

tre that has the most appropriate tools and is able

to perform the operations without compromising

the safety of the machine.

3. ELECTRIC CABLES

WARNING! Check the condition of the

The best results will be obtained with the blade

slightly inclined (5° - 10°) in the direction you are

cutting, proceed with a curved movement, slowly

and without interruptions, especially in the ca se of

very thick hedges.

4. LUBRICATING THE BLADES DURING

JOBS (Fig. 6)

If the trimming device overheats whilst working, it

is necessary to lubricate the internal surfaces of

the blades.

WARNING! This operation must only

be performed when the blades have stopped

running and the motor is switched o.

4. END OF OPERATIONS

When you have nished your work:

– Switch o the motor as indicated above (Chap.

6).

WARNING! Allow the motor to cool

before storing in any enclosure.

To reduce re hazards, clean the machine

thoroughly to get rid of any remains of grass,

leaves or excess grease, never leave contain-

ers with the cut debris inside the storage area.

To increase the eciency and working life of the

blades, clean and lubricate them carefully after

each work session.

– Use a soft cloth to clean the blades, along with

a brush to remove more dicult dirt and debris.

– Lubricate the blades with suitable, non-polluting

oil were possible.

8. MAINTENANCE AND STORAGE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 600 in the language / languages: All languages as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 600 Manual

Product: