Manual Stiga SHT 600 (page 21 of 258) (All languages)

608750

Zoom out

Zoom in

1/258

the power tool accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

e) Maintain power tools. Check for misalignment

or obstruction of moving parts, breakage of

parts and any other condition that may aect

the power tool’s operation. If damaged, have

the power tool repaired before use. Many acci-

dents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to become jammed and are easier

to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

ta king into account the working conditions

and the work to be performed. Using the power

tool for operations other than those intended could

result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualied

re pair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

ELECTRIC HEDGE TRIMMER

SAFETY WAR NINGS

WARNING! The safety rules must be

observed during machine use. Before starting the

machine, read the instructions regarding per sonal

safety and the safety of unauthorized persons.

Keep the instructions in a good state for future

use.

– Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold ma-

terial to be cut when blades are moving. Make

sure the switch is o when clearing jammed ma-

terial. A moment of inattention while operating the

hedge trimmer may result in serious personal injury.

– Carry the hedge trimmer by the handle with

the cutter blade stopped. When transporting

or storing the hedge trimmer always t the

cutting device guard. Proper handling of the hedge

trimmer will reduce possible personal injury from

the cutter blades.

– Hold the power tool by insulated gripping sur-

faces only, because the cutter blade may come

in contact hidden wiring or its own cord. Cutter

blades contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give

the operator an electric shock.

– Keep cable away from cutting area. During oper-

ation the cable may be hidden in shrubs and can be

accidentally cut by the blade.

• How to use the electric hedge trimmer

When using the machine, always use caution and take

on a rm and well-balanced position.

– Where possible, avoid working on wet, slippery

ground or in any case on uneven or steep ground

that does not guarantee stability for the operator.

– Never run, but walk carefully paying attention to the

lay of the land and any eventual obstacles.

– Assess the potential risks of the ground to be mown

and take all necessary precautions to en sure your

own safety, especially on slopes or on bumpy,

slippery or unstable ground.

Do not use the machine if you are unable to hold it

with both hands or keep it steady on your legs while

working.

Never allow children or persons unfamiliar with these

instructions to use the machine. Local regulations can

restrict the age of the user.

The machine must never be used by more than one

person.

Never use the machine:

– when people, especially children or pets are in the

vicinity;

– if the user is tired or unwell, or has taken medicine,

drugs, alcohol or any substances which may slow

his reexes and compromise his judgement;

– if the guards are damaged or have been removed.

• Techniques for using the electric hedge

trimmer

Always observe the safety regulations and use the

most suitable cutting techniques (see chapter 7 for

in structions and examples).

• Handling the electric hedge trimmer safely

Whenever the machine is to be handled or transpor-

ted you must:

– turn o the motor, wait for the cutting device to stop

and unplug the machine from the mains;

– only hold the machine using the handgrips and

position the cutting device in the opposite direction

to that used during operation.

When using a vehicle to transport the machine, pos-

ition it so that it can cause no danger to persons and

fasten it rmly.

• Recommendations for rst-time users

Before tackling a job for the rst time, it is advisable

to gain the necessary familiarity with the machine and

the most suitable techniques, nding out how to rmly

grip the machine and perform the movements required

by this particular job.

SAFETY WARNINGS 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 600 in the language / languages: All languages as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 600 Manual

Product: