780434
50
Zoom out
Zoom in
Previous page
1/81
Next page
49
Release the clamping bolt(s) located on the side of the stem by one to
two complete turns.
Gently tighten a little the countersunk adjusting bolt on the top, i.e. by
a quarter turn at the most, by using an Allen key.
Realign the stem with the frame so that the handlebars are not slanted
when the wheel points straight ahead.
Retighten a little the clamping bolt(s) of the stem until the stem no
longer turns relative to the fork. Do not exceed the torque values spec-
ified by the stem manufacturer, see chapter “Recommended Torque
Settings“.
Check the headset for play, as described further above. Take care not to
overtighten the bearings, as this could easily damage them.
The Headset
Caution:
Do not overtighten the upper
bolt, it only serves the pur-
pose of adjusting the bearing
play, not of securing the stem!
Danger:
Check the secure seat of the
stem after having adjusted
the bearings, by holding the
front wheel between your
knees and trying to twist the
handlebars relative to the
front wheel. A loose stem can
throw you o your bicycle!
Caution: In the case of full carbon forks the torque values
are often clearly below the specifications of the
stem manufacturers. A sufficient clamping is usually already achieved with
inferior forces. Tighten carefully by approaching the prescribed maximum
torque value in small steps until the stem no longer turns relative to the
fork or front wheel. Too high torque values can destroy the steerer tube! To
ensure a larger clamping surface, slide a spacer on top of the stem (picture
on the left).
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens Race - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens Race - 2014 in the language / languages: English as an attachment in your email.

The manual is 11.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens Race - 2014

Stevens Race - 2014 User Manual - German - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info