780434
52
Zoom out
Zoom in
Previous page
1/81
Next page
51
9.2. Aluminium and Carbon Framesets
STEVENS offers certain high-quality carbon and high-end aluminium
frames as bare framesets with fork. The person completing the frame and
mounting the add-on parts must therefore ensure that all components
are compatible and properly mounted. STEVENS cannot be held responsi-
ble for any component combination possible. For this reason it absolutely
impossible to describe every conceivable option in this manual. For this
reason, we strongly advise you to carefully read the component manufac-
turers’ operating instructions, as well. You find these instructions on the
STEVENS CD-ROM.
Be aware that these instructions may require further explanation, de-
pending on the experience and/or skills of the person doing the work.
For some jobs you may require additional (special) tools, e.g. a torque
wrench, or supplementary instructions.
Improper assembly can render the bicycle unsafe. Have your bicycle
therefore assembled by an authorized STEVENS partner.
Frames are delivered ready for assembly, i.e. with threads cut and bear-
ing seats and seat tube faced. There is no need for any reworking on the
frame.
Do not modify the frame or its functioning parts, e.g. the adjustable cable
guides etc., by filing, boring or the like.
Be sure to use high-quality assembly grease when mounting add-on
parts to the frame. Except: for carbon seat posts in general, but also for
aluminium seat posts in carbon frames and stems on carbon forks. In
these cases you should use special carbon assembly paste. This helps to
avoid corrosion. Otherwise you may find it impossible to disassemble the
bicycle after a certain period of time.
In the case of road racing and cyclocross frames a fork is included. Please
note the mounting instructions in chapter “STEVENS Carbon Forks”.
Carbon and Framesets
Caution:
Do not clamp the frame on an
assembly stand by its tubes!
This could cause damage to
the thin-walled tubes. First
mount a sturdy aluminium
seat post and use this to
clamp the frame, or use an
assembly stand which holds
the frame at three points from
inside or which holds the fork
and bottom bracket shell.
Caution:
For your own safety, never
do any work unless you feel
absolutely sure about it. If
you are in doubt, ask your
STEVENS dealer for help!
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens Race - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens Race - 2014 in the language / languages: English as an attachment in your email.

The manual is 11.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens Race - 2014

Stevens Race - 2014 User Manual - German - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info