754688
8
Zoom out
Zoom in
Previous page
1/15
Next page
8760.180 | 17.10
ENGLISH
7.3 Temperature alarm
The temperature alarm helps to protect your cooled / frozen products and also
helps to save energy.
The alarm sounds when the internal space is not cold enough. The temperature
display flashes at the same time, or when too much warm air enters the cabinet
while sorting, placing, or removing food.
Pressing the alarm-off button mutes the alarm. The temperature display contin-
ues to flash until the alarm state is over.
8 Menu functions
The following functions can be set using the menu:
The display brightness
Temperature display in degrees Celsius or Fahrenheit
The use of the device as a refrigerator or freezer
8.1 Setting the brightness
XPressing the button (Menu) for 3 seconds brings you to the menu, the
display (°F symbol) flashes and "b" is displayed.
XPressing the button (Menu) again causes a "1" to appear in the display.
XThe buttons (Up / Down) allow a brightness value of “1”, “2” or “3” to
be selected. The higher the number, the brighter the display.
XOnce the desired brightness has been set, this has to be confirmed by
pressing the button (Menu).
Pressing the button (On / Off) returns you to the standard mode.
NOTE
Energy saving
XThe higher the brightness, the higher the power consumption. The factory set-
ting “b1” is the power-saving mode.
8.2 Setting the display of Celsius / Fahrenheit
XPressing the button (Menu) for 3 seconds brings you to the menu, the
display (°F symbol) flashes and "b" is displayed.
XPressing the button (Up) allows you to change from "b" to “”.
XIf you now press the button (Menu) then “°C” appears.
XThe buttons (Up / Down) can now be used to select between “°C” and
“°F”.
XOnce the desired value has been set, this is confirmed by pressing the
button (Menu).
Pressing the button (On / Off) returns you to the standard mode.
8.3 Setting refrigerator / freezer mode
XPressing the button (Menu) for 3 seconds brings you to the menu, dis-
play (°F symbol) flashes.
XPressing the button (Up) causes ““ to appear.
XPressing the button again causes “F” to appear.
XPressing the button (Menu) again causes “F “ to display.
XThe buttons (Up / Down) can now be used to select between refrigerator
“F “ and freezer “F “.
XOnce the desired value has been set, this is confirmed by pressing the
button (Menu).
Pressing the button (On / Off) returns you to the standard mode.
1
2
3
4
1
2
3
4
5
1
Refrigerator Freezer
2
3
4
5
6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steca PF240-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steca PF240-H in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Steca PF240-H

Steca PF240-H User Manual - German - 15 pages

Steca PF240-H User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info