754688
7
Zoom out
Zoom in
Previous page
1/15
Next page
7
760.180 | 17.10
ENGLISH
6.1 Direct connection to the battery
CAUTION
The device does not function
XPlease pay attention to the correct polarity!
The compressor is switched off by the integrated deep discharge protection, but
the control unit remains in operation. The alarm sounds when the temperature
increases (see chapter 7.3).
NOTE
Connection to the battery
XSelect this type of connection when you wish to give your device a high priority
in the solar energy system, e.g. when you wish to cool / freeze critical products.
6.2 Connection to a charge controller with deep dis-
charge protection
CAUTION
The device does not function
XPlease pay attention to the correct polarity!
If the deep discharge protection of the charge controller completely switches off
the cabinet power, then the control unit also receives no power. When the device
is switched on again automatically, the integrated power outage display (see
chapter 9) informs you of the internal temperature reached.
NOTE
Connection to a charge controller
XSelect this type of connection when you wish to give your device the same
priority as other loads in the solar energy system, e.g. when you wish to cool /
freeze non-critical products.
7 Operating the device
7.1 Switching the device on / off
The device can be manually switched on or off using the button (On / Off).
If the cabinet is switched off, the minus symbol flashes to indicate that the
cabinet is still connected to the power.
When the device is connected for the first time, it must be manually switched on
by pressing the button (On / Off).
On delivery, the device is set to cool (+8 °C | 46 °F).
7.2 Setting the temperature
The standard internal temperature for normal operation is +8 °C | 46 °F. This
value can be changed in the following manner.
The desired internal temperature is set by pressing the buttons (Up /
Down). Pressing a button once causes the display to begin flashing.
If the button is pressed again while the display is flashing, each button
press increases / reduces the value by 1 °C | 1 °F.
If no button is pressed within a period of 5 seconds, the currently set value is
adopted as the actual temperature.
NOTE
Adjustable temperature range
XIn refrigerator mode, temperatures from +2 °C | 36 °F to +12 °C | 54 °F can be
set, and in freezer mode, temperatures from −10 °C | 14 °F to −20 °C | −4 °F
can be set.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steca PF240-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steca PF240-H in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Steca PF240-H

Steca PF240-H User Manual - German - 15 pages

Steca PF240-H User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info