720594

Stanley STR-4 in 1 Manual

39
Zoom out
Zoom in
Previous page
1/240
Next page
39
Before Assembly
You can use Figure 38 as a reference and familiarize
yourself with the hedge cutter and their various
components. By understanding the device, an excellent
performance, a longer service life and a safe use will be
ensured.
Check the completeness of all components of the unit
before you install the device.
• Cutting attachment
• Blade cover
• Operating instructions
• Check tool kit for routine maintenance Check all
components and make sure that no components are
damaged.
Warning!
Do not make any unauthorized modifications or
alterations to your hedge shears with articulated arm or
their components.
Installation of the tubes
1. Insert the tube with the actuator head (lower tube)
and the upper tube on a clean, level surface so that both
ends can be inserted into each other. The tube with the
actuator head (lower tube) and the protection of the
latch of the the upper tube must point upwards.
Caution: The open ends of the tubes must be clean and
free of dirt!
2. Loosen the screw of the connecting piece.
3. Press the latch downward and slide the tube with the
actuator head (lower tube) up to the limit stop in the
connection piece. Release the latch. Push the upper tube
back and forth until it is locked in the connecting piece.
See A 39.
1). Latch
2). Latch protection
3). Indent
4). Tube with actuator head (lower tube) 5). Connection
piece
6). Screw of the upper tube
7). Screw of the connecting piece
4. If the two tubes are connected with each other, push
the latch protection in the notch and tighten the screw
of the connection piece. See A 40.
A39
4
3
5
6
A40
5
G
B
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info