720594
37
Zoom out
Zoom in
Previous page
1/240
Next page
37
Never use the hedge cutter with articulated arm without
sound-absorber.
Ensure adequate ventilation when you use the hedge
cutter with articulated arm. The exhaust gases can
cause serious injury or death. Never start the engine in
closed rooms.
Check that there are no fasteners are missing or are
loose and that the stop switch and throttle are working
properly.
If the hedge cutter is stuck, switch off the engine
immediately. Push the twigs or branch to the side and
free the hedge cutter.
Make sure that the blade is aligned properly before
using the hedge cutter with articulated arm. Never
adjust the blade when the engine is running. Make sure
that no fuel flows out from the tank, the lid, the fuel line
and the carburettor or other parts, from which fuel can
leak out.
Repair the device if fuel leaks and make sure that there
is no leakage any more.
Safety instructions in case of backlash and
jamming
Warning!
Through setbacks or jamming, you could lose control
over the hedge cutter and injure yourself seriously. Do
not rely on yourself alone with regard to the integrated
safety device of the hedge cutter. You will need to take
various measures so that no accidents or injuries can
occur.
1. Be prepared for backlashes or jamming. Avoid or
eliminate the element of surprise.
Surprise moments contribute to accidents.
2. Hold the hedge cutter firmly with both hands when
the engine is running. By holding well, you will reduce
the impact of backlashes or jamming and keep control
over the device.
3. Ensure that the area in which you work is free from
obstruction.
4. Cut with a high speed.
5. Use only the spare blade or an equivalent blade,
specified by the manufacturer.
Warning!
The hedge cutter with articulated arm must neither be
transported or put down, with the engine running. The
running engine could accidentally accelerate and thus
make the blade to vibrate.
If the hedge cutter is carried with articulated arm, the
cutting attaching must be found in the transport position.
See A 37.
A37
Caution!
The safety devices of the hedge cutter may not be
manipulated or deactivated.
For the repair and maintenance of this device, use only
original parts and accessories.
Do not make any unauthorized modifications to the
hedge cutter with articulated arm.
In case of transport in a vehicle, the hedge shears must
be secured, so that there is no fuel leak or the device
can be damaged.
Remove rubbish and small parts from your work area in
order to ensure a secure position.
Hold the blade sharp and correctly aligned.
Keep the hedge cutter with articulated arm as clean as
possible. Remove loose branches, mud, dirt, etc.
G
B
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info