720594
36
Zoom out
Zoom in
Previous page
1/240
Next page
36
10. Working with petrol hedge cutter
The hedge cutter is designed with articulated arm for
a high level of performance and reliability without
compromising on quantity, user-friendliness, safety or
service life.
Safety Instructions
Danger!
The hedge cutter with articulated arm is not insulated
against electric shock!
The approach to or contact with electrical power cables
with the hedge cutter can result in death or serious
injury. Hold the hedge cutter at least 10 meters away
from power cables or branches, which touch the power
cables.
In the case of a hedge shears with articulated arm,
there is a risk of serious injury if it is incorrectly used
or handled. In order to minimize the risk of injury, the
device must be under control at all times and during the
use, pay attention to all safety instructions. Do not allow
a person to work with the device, who has not been
trained or who has not been given instructions.
Instructions for Use
Read the operating instructions carefully
before you switch on the device.
Incorrect use can lead to personal injury or
damage to property. People who are not familiar with
the operating instructions may not use the device.
Keep the manual in a safe place.
Children and young people may not use the device.
Always wear a helmet to avoid head injuries
while using the device. In addition, wear eye
protection and hearing protection. We also
recommend wearing a face protection as
additional protection for face and eyes.
Wear non-slip work gloves to be hold the
hedge cutter better. Wear sturdy shoes with
anti-slip sole for a secure position. Safety
shoes with steel caps are recommended.
Wear tight-fitting clothing that nevertheless
allows you freedom of movement.
Do not use this device or other powered
devices if you are tired or sick or under
the influence of alcohol, drugs or other
substances, which could affect your skills
or your competence of judgement.
There must be a distance of at least 10 meters between
people standing nearby and the switched on hedge
cutter, so that they do not come in contact with objects
falling down or small parts flying around.
Never cut branches above your head. The
cut branches could hit you and cause
serious injury.
Warning!
Do not allow a person to work with the device, who has
not been trained or who has not been given instructions.
Make sure that the cutting attachment is properly
mounted and fixed before use.
Do not use the hedge cutter or cutting device if they are
damaged or warped. Replace or repair the components
before use.
Make sure that there are no objects in the vicinity of the
hedge cutter before you start the engine.
Turn the engine off immediately and check the device for
damage, if you come into contact with a hard object or
if the device gets caught. Do not use the appliance if it
is damaged or broken. Pay attention to the springback,
if you cut a branch found under tension, so that you are
not injured by the branch springing back.
Switch off the device immediately when it suddenly
begins to vibrate or shake. Check the device for
broken, missing or incorrectly mounted components or
attachments.
It is not permitted to smoke or light a fire in the vicinity
of the hedge shears. Keep the hedge shears away from
excessive heat. The engine fuel can be easily ignited and
a fire can cause severe injury to persons and property.
G
B
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info