720594
31
Zoom out
Zoom in
Previous page
1/240
Next page
31
9.2.2 Spark plug replacement
Check at least once a year or in case of regular bad starts,
the gap between the electrodes in the spark plug (H). The
correct distance between the ignition flag and ignition
contact is 0.63 mm/0.25".
- Wait until the engine is completely cooled.
- Pull out the spark plug cap (I) from the spark plug (H) and
rotate the spark plug with the supplied spark plug wrench
(32).
- In case of excessive wear of the electrode or if there is
very heavy incrustation, the spark plug must be replaced
with one of the same type.
Heavy incrustation on the spark plug can be caused by:
Too high percentage of oil in the fuel mixture, bad oil
quality, very old gasoline mixture or clogged air filter .
- Turn the ignition plug (h) by hand completely into the
thread. Avoid any tilting of the spark plug while doing so.
- Tighten the spark plug (H) using the supplied spark plug
wrench (32).
- When using a torque wrench, the tightening torque is
12-15 Nm.
- Insert the spark plug connectors (I) correctly on the spark
pluge.
To avoid the risk of accidental start-up,remove the spark
plug cap.
A26
0,63 mm
h
29 i
h
i
9.2.3 Wear Parts
Even with proper use, some components are subject to
normal wear.
These must be replaced regularly depending on the type
and duration of use. These parts include the cutting tool
and the retaining plate.
G
B
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info