720594

Stanley STR-4 in 1 Manual

33
Zoom out
Zoom in
Previous page
1/240
Next page
33
9.2.6 Maintenance of the guide rail
• Rotate the rail every time around, if you have
sharpened or replaced the chain. This avoids a one-
sided wear of the rail, particularly at the top and bottom.
Clean
1 = the opening for the oil supply 2 = the oil passage
3 = the groove of the rail regularly
9.2.7 Maintenance and sharpening of the saw chain
The really sharpened chain
A properly sharpened chain goes effortlessly through the
wood and requires very little pressure. Do not work with
a dull or damaged saw chain. It increases physical effort,
increases the the vibration and leads to unsatisfactory
results and higher wear.
• Clean the chain.
• Check for breaks in the parts and for damaged rivets.
• Replace damaged or worn chain parts with matching
spare parts, which you may file in the form and size of
the original parts, if necessary.
• The sharpening of a chain should be carried out only
by experienced users!
Note the specified angles and measurements below. If
the saw chain is not correctly sharpened or the depth
dimension is too small, there is a higher risk of backlash
effects and injuries resulting out of this!
The saw chain cannot be fixed on the guide rail. It is
therefore best to take the chain from the rail and then to
sharpen it.
• Select a suitable sharpening tool for the chain pitch.
See "Technical Specifications" for the approved chain
pitches.
The chain pitch (for example, 3/8 ") is highlighted in the
depth gauge of each blade.
Use only special files for saw chains! Other files have
the wrong form and the wrong sharpening.
Select the diameter of the file according to your chain
pitch. Please also pay attention to the following angle
when sharpening the chain blade.
A = filing angle
B = angle of the side plate
The angle must also be maintained for all blades.
In uneven angles, the chain will run irregularly, wear out
quickly and break prematurely.
A29
A30
A31
A32
G
B
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info