Manual Stanley SPT-270-720 (page 24 of 233) (English, German, French, Italian, Finnish)

720580

Zoom out

Zoom in

1/233

5. Remove the frame cover from the underside

of the snow thrower by removing the screws

which secure the cover.

6. Remove the belt(s) from around the auger

pulley, and slip the belt(s) between the

support bracket and the auger pulley.

7. Replace the auger belt(s) by following

instructions in reverse order.

Drive Belt

If the drive belt becomes worn, oil-soaked, or

otherwise damaged, proceed as follows to

replace the belt.

1. To prevent spillage, remove all fuel from

tank by running engine until it stops.

Remove the key to avoid unintended

starting and allow unit to cool completely.

2. Remove the two screws that hold the belt

cover in place and set the cover aside.

3. Remove the belt as follows.

a. Roll the auger belt off the engine pulley.

b. Pivot the idler pulley toward the right

to relieve tension.

c. Lift the drive belt off engine pulley.

4. Carefully pivot the snow thrower up and

forward so that it rests on the auger housing.

5. Remove the frame cover from the underside

of the snow thrower by removing the screws

which secure the cover.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SPT-270-720 in the language / languages: English, German, French, Italian, Finnish as an attachment in your email.

The manual is 23,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SPT-270-720 Manual

Product: