Manual Stanley FMHT0-77421 (page 25 of 174) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

720797

Zoom out

Zoom in

1/174

range until satisfactory resolution is obtained.

Measuring Resistance

1. Connect the black test lead to the "COM" terminal and the red test

lead to the "

" terminal.

2. Set the range switch to Ω position.

3. Connect test leads across the object to be measured.

4. Read the output on the display.

Note:

1. For measurements > 1MΩ, the meter may take a few seconds to

stabilize reading. This is normal for high resistance measurements.

2. When the input is not connected, i.e. at open circuit, "OL" will be

displayed as overrange indication.

3. Before measurement, disconnect all power to the circuit to be tested

and discharge all capacitors thoroughly.

Continuity Test

1. Connect the black test lead to the "COM" terminal and the red test

lead to the "

" terminal.

2. Set the range switch to "

" position, then press the "S"

button until the symbol "

" appears on the display.

3. Connect the test leads to the circuit to be measured.

4. If the circuit resistance is less than about 30Ω, the built-in buzzer will

sound.

Note: Before test, disconnect all power to the circuit to be tested and

discharge all capacitors thoroughly.

Diode Test

1. Connect the black test lead to the "COM" terminal and the red test

lead to the "

" terminal. (Note: The polarity of the red lead

is positive "+")

2. Set the range switch to "

" position, then press the "S"

button until the symbol "

" appears on the display.

3. Connect the red test lead to the anode of the diode to be tested and

the black test lead to the cathode of the diode.

4. The display shows the approximate forward voltage drop of the

diode. If the connection is reversed, "OL" will be shown on the display.

Measuring Capacitance

1. Connect the black test lead to the "COM" terminal and the red test

lead to the "

" terminal.

1. Set the range switch to

position.

3. If the display doesn’t read zero, press the "REL" button.

4. Connect the test leads across the capacitor to be measured.

5. Wait until the reading is stable, then read the output on the display.

(For high capacitance measurements, it may take about 30 seconds

for reading to stabilize.)

Note: Before measurement, make sure that the capacitor to be

measured has been discharged thoroughly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT0-77421 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley FMHT0-77421 Manual

Product: