Manual Stanley FMHT0-77421 (page 27 of 174) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

720797

Zoom out

Zoom in

1/174

Replacing the Battery and Fuse

Warning

To avoid false readings, which could lead to possible electric

shock or personal injury, replace the battery as soon as the low

battery indicator ("

") appears.

To prevent damage or injury, install only replacement fuses

with the specified amperage, voltage, and interrupt ratings.

Disconnect the test leads before opening the back cover or the

battery cover.

To replace the battery, remove the screws on the battery cover and

remove the battery cover, replace the exhausted battery with a new

battery of the same type (9V, 6F22 or equivalent). Reinstall the battery

cover and the screws.

This meter uses two fuses:

To check Fuse 1:

1. Remove the screws on the back cover and remove the back cover.

2. Use another multimeter to check the continuity of the fuse.

To check Fuse 2:

1. Set the range switch to "

" position, then press the "S"

button until the symbol "

" appears on the display.

2. Connect the red test lead to the "

3. Insert the red test lead into the “10A” terminal. If a tone is sounded,

the fuse is good.

Fuse 1: F 400mA/690V, Min. Interrupt Rating 20000A,

Ø10X38mm

Fuse 2: F 10A/690V, Min. Interrupt Rating 20000 A, Ø10X38mm

To replace the fuse, remove the screws on the back cover and remove

the back cover, replace the blown fuse with a new one of the same

ratings. Reinstall the back cover and all the screws

ACCESSORIES

Manual: 1 piece

Test Lead: 1 pair

NOTE

1. This manual is subject to change without notice.

2. Our company will not take the responsibilities for any loss.

3. The contents of this manual can not be used as the reason to use

the meter for any special application.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT0-77421 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley FMHT0-77421 Manual

Product: