720797
23
Zoom out
Zoom in
Previous page
1/174
Next page
23
Diode Test
Range
Introduction Remark
2V
The approximate forward voltage
drop of the diode will be displayed.
If the voltage drop is more than 2V,
the display shows the overrange
indicator "OL"
Open Circuit
Voltage:
about 3V
Short Circuit
Current:
< 0.9mA
Continuity Test
Range
Introduction Remark
The built-in buzzer will sound if the
resistance is less than about 30Ω.
The buzzer will not sound if the
resistance is more than 150Ω
Open Circuit
Voltage: about
0.45V
OPERATION INSTRUCTION
Using Relative Mode
Selecting Relative mode causes the meter to store the present reading
as a reference for subsequent measurements and zero the display.
1. Press the REL button, the meter enters the Relative mode and stores
the present reading as a reference for subsequent measurements,
and "
" appears as an indicator. The display reads zero.
2. When you perform a new measurement, the display shows the
difference between the reference and the new measurement.
3. Press the REL button again, the meter exits the Relative mode.
Note: Relative mode is available only in voltage, current, capacitance
and resistance measurements.
Manual Ranging and Autoranging
The meter defaults to autorange mode in measurement functions
which have both autorange mode and manual range mode. When the
meter is in autorange mode, "AUTORANGE" is displayed.
1. Press the RANGE button to enter the manual range mode, the
symbol "AUTORANGE" disappears. Each press of the RANGE
button increases the range. When the highest range is reached, the
meter wraps to the lowest range.
2. To exit the manual range mode, press and hold down the RANGE
button for about 2 seconds. The meter returns to the autorange mode
and "AUTORANGE" is displayed.
Data Hold Mode
Press the HOLD button to hold the present reading on the display,
the symbol "
" will appear on the display as an indicator. To exit
the Data Hold mode, just press the button again. "
" disappears.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMHT0-77421 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMHT0-77421 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 17,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info