Manual Stanley DN55-8-5 (page 9 of 12) (English)

720675

Zoom out

Zoom in

1/12

9. TROUBLE SHOOTING GUIDE

Note: Remove power source and drain tank pressure prior to making any repairs or adjustments.

FAULT PROBABLE CAUSE REMEDY

Unit will not run Tank pressure exceeds “cut in”

pressure

Once pressure drops below “cut in”

pressure, the unit will start.

Extension cord causing excessive

amp draw

Check guidelines for proper cord

gauge (use of extension cords is not

recommended).

Fuse or circuit tripped Replace fuse or reset breaker.

Unit not turned on or not plugged in Check pressure switch and verify that it

isintheOnposition.Verifythatunitis

plugged in.

Cold weather conditions (typically

temperatures below freezing)

Place compressor in warmer environment

for at least 30 minutes then try restarting.

Airleaksatttings Fittings loose Tightentting.Checkwithsoapywater.

DONOTOVERTIGHTEN.

Air leak at pressure switch Clogged check valve Remove and clean check valve.

Unit will not build pressure Application requires excessive air

demand

Reduce demand on compressor.

Loose head Tighten bolts on head.

Blown gasket Remove head and check for broken or

deformed gasket. Replace if needed.

Open drain valve Close drain valve.

Unit will not build pressure Worn or broken valves Remove head and replace valves.

Air leak at tank or air tank welds. Damaged air tank

Warning!

Do not drill into, weld or otherwise

modifyairtank.Damagedormodied

tanks can rupture. Replace tank

immediately.

Any other type of operation must be carried out by authorized Service Centers, requesting original parts.

Tamperingwiththemachinemayimpairitssafetyandinanycasemakethewarrantynullandvoid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley DN55-8-5 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley DN55-8-5 Manual

Product: