720675
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
G
B
1. PRECAUTIONS
All users must read and fully understand all
information contained in this owner’s manual
before assembling, operating, or maintaining
this air compressor.
Carefully review the following rules for safe
operation and fully understand all warnings.
THINGS TO DO
The compressor must be used in a suitable environment
(well ventilated with an ambient temperature of between
+5°C and +40°C) and never in places affected by dust,
acids, vapours, explosive or flammable gases.
Always maintain a safety distance of at least 4 meters
between the compressor and the work area.
Any coloring of the belt guards of the compressor during
painting operations indicates that the distance is too short.
Insert the plug of the electric cable in a socket of suitable
shape, voltage and frequency complying with current
regulations.
Use extension cables with a maximum length of 5 meters
and of suitable cross-section.
The use of extension cables of different length and also of
adapters and multiple sockets should be avoided.
Always use the I/O switch to switch off the compressor.
Always use the handle to move the compressor.
Always disconnect power cord and air hose from the air
compressor before transporting.
When operating, the compressor must be placed on a
stable, horizontal surface.
THINGS NOT TO DO
Never direct the jet of air towards persons, animals or your
body. (Always wear safety goggles to protect your eyes
against flying objects that may be lifted by the jet of air).
Never direct the jet of liquids sprayed by tools connected to
the compressor towards the compressor.
Never use the appliance with bare feet or wet hands or
feet.
Never pull the power cable to disconnect the plug from the
socket or to move the compressor.
Never leave the appliance exposed to adverse weather
conditions.
Never transport the compressor with the receiver under
pressure.
Do not weld or machine the receiver. In the case of faults or
rusting, replace the entire receiver.
Never allow inexpert persons to use the compressor. Keep
children and animals at a distance from the work area.
Do not position flammable or nylon/fabric objects closed to
and/or on the compressor.
Never clean the compressor with flammable liquids or
solvents. Check that you have unplugged the compressor
and clean with a damp cloth only.
The compressor must be used only for air compression. Do
not use the compressor for any other type of gas.
The compressed air produced by the compressor cannot
not be used for pharmaceutical, food or medical purposes
except after particular treatments and cannot be used to fill
the air bottles of scuba divers.
To avoid serious burns, never touch the cylinder head parts
or tubing during or immediately after operation.
THINGS YOU SHOULD KNOW
To avoid overheating of the electric motor, this
compressor is designed for intermittent operation
(do not operate on more than a 50% duty cycle. If this air
compressor pumps air more than 50% of one hour, then the
compressor’s capability is less than the air delivery required
by the application. Always match the air volume requirements
of the attachment or accessory with the air volume delivery
of the compressor). In the case of overheating, the thermal
cut-out of the motor trips, automatically cutting off the
power when the temperature is too high. The motor restarts
automatically when normal temperature conditions are
restored.
When the compressor is plugged into an electrical
source and the pressure switch is in the “ON” position,
this compressor will cycle automatically.
Never touch any moving parts.
Keep all body parts, hair, clothing, and jewelry away from
moving parts.
Never operate the air compressor without all guards and
shrouds in place.
Never stand on the compressor.
The compressor is fitted with a safety valve that is tripped in
the case of malfunctioning of the pressure switch in order to
assure machine safety.
When fitting a tool, the flow of air in output must be switched
off.
When using compressed air, you must know and comply
with the safety precautions to be adopted for each type of
application (inflation, pneumatic tools, painting, washing
with water-based detergents only, etc.).
Never exceed the maximum allowable pressure
recommended by the manufacturer of any attachment or
accessory you use with this compressor.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not
play with the appliance.
Preserve this handbook for future reference.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley DN55-8-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley DN55-8-5 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info