603475

Standard Horizon PHANTOM - PS2000 Manual

30
Zoom out
Zoom in
Previous page
1/84
Next page
Phantom PS2000Page 30
10.9 MAKING TELEPHONE CALLS
To make a radiotelephone call, use a channel designated for this purpose, The
fastest way to learn which channels are used for radiotelephone traffic is to ask
at a local marina. Channels available for such traffic are designated Public
Correspondence channels on the channel charts in this manual. Some ex-
amples for USA use are Channels 24, 25, 26, 27, 28, 84, 85, 86, and 87. Call
the marine operator and identify yourself by your vessel’s name, The marine
operator will then ask you how you will pay for the call (telephone credit card,
collect, etc.) and then link your radio transmission to the telephone lines.
The marine telephone company managing the VHF channel you are using may
charge a link-up fee in addition to the cost of the call.
10.10 OPERATING ON CHANNELS 13 AND 67
Channel 13 is used at docks and bridges and by vessels maneuvering in port.
Messages on this channel must concern navigation only, such as meeting and
passing in restricted waters.
Channel 67 is used for navigational traffic between vessels.
By regulation, power is normally limited to 1 Watt on these channels. Your radio
is programmed to automatically reduce power to this limit on these channels.
However, in certain situations it may be necessary to temporarily use a higher
power. See page 20 and 22 (
[
H/L
]
key) for means to temporarily override the
low-power limit on these two channels.
10.11 DUAL WATCH
(
TO PRIORITY CHANNEL
)
Dual watch allows the radio to monitor one channel and the assigned Priority
channel. By default the priority channel is set to 16, however the priority chan-
nel may be changed by referring to section “12.7 PRIORITY CHANNEL SET.”
1. Set the squelch level to the “squelch threshold” (the background noise is
turns off).
2. Select the channel you wish to dual watch along with the selected priory
channel.
3. On the RAM+ mic, press the
[
DW
]
key momentarily.
On the VH-310 Handset, press the
[
F
]
key, followed by the
[
4
(
DW
)]
key.
The Phantom PS2000 will scan between Priority channel
and the channel that was selected in step 2. If a transmis-
sion is received on the channel selected in step 2, the Phantom PS2000
will dual watch between the working channel and the Priority channel.
4. To stop Dual Watch, press the
[
DW
]
key again on the RAM+ mic, or press the
[
F
]
key, followed by the
[
4
(
DW
)]
key again on the VH-310 Handset, or press
the
[
16/9
]
or
[
WX
]
key.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon PHANTOM - PS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon PHANTOM - PS2000 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info