603475

Standard Horizon PHANTOM - PS2000 Manual

32
Zoom out
Zoom in
Previous page
1/84
Next page
Phantom PS2000Page 32
4. To DELETE a channel from the transceiver’s memory, select
the channel then press and hold the
[
SCAN
]
key on the RAM+
mic., or press the
[
F
]
key, followed by the
[
2
(
MEM
)]
key on the
VH-310 Handset. “MEM” will disappear in the LCD.
5. To start scanning, press the
[
SCAN
]
key momentarily on the
RAM+ mic., or press the
[
F
]
key, followed by the
[
3
(
SCAN
)]
key
on the VH-310 Handset. “M-SCAN” appears on the LCD. Scan-
ning will proceed from the lowest to the highest programmed
channel number and will stop on a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the
[
16/9
]
,
[
WX
]
, or PTT key.
10.12.3 Priority Scanning
(
P-SCAN
)
In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to the desired channel from the Channel 16 by the Radio
Setup Mode, refer to section “12.7 PRIORITY CHANNEL SET.”
1. Set the squelch level to the “squelch threshold” (the background noise is
turns off).
2. Select a desired channel to be scanned using the
[
]
or
[
]
key, then
press and hold the
[
SCAN
]
key on the RAM+ mic., or press the
[
F
]
key,
followed by the
[
2
(
MEM
)]
key on the VH-310 Handset. “MEM” will appear
on the LCD which indicates the channel has been programmed into the
transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
]
key on the RAM+ mic., or press the
[
F
]
key, followed by the
[
2
(
MEM
)]
key on the VH-310 Handset. “MEM” will
disappear in the LCD.
5. To start priority scanning, press the
[
SCAN
]
key momantarily on the RAM+
mic., or press the
[
F
]
key, followed by the
[
3
(
SCAN
)]
key on
the VH-310 Handset (“P-SCAN” appears on the LCD). Scan-
ning will proceed between the memorized channels and the
priority channel. CH 16 the priority channel will be scanned
after each programmed channel.
6. To stop scanning, press the
[
16/9
]
,
[
WX
]
, or PTT key.
You may change the scan resume time by the Radio Setup Mode, refer to
section “12.9 SCAN RESUME TIME.”
MEM CH. CH. 16 MEM CH. CH. 16
MEM CH. CH. 16
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon PHANTOM - PS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon PHANTOM - PS2000 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info