Manual Standard Horizon PHANTOM - PS2000 (page 29 of 84) (English)

603475

Zoom out

Zoom in

1/84

Page 29Phantom PS2000

9. End the message by saying “OVER.” Release the microphone button and

listen.

10. If there is no answer, repeat the above procedure. If there is still no re-

sponse, try another channel.

10.8 CALLING ANOTHER VESSEL

(

CHANNEL 16 OR 9

)

Channel 16 may be used for initial contact (hailing) with another vessel.

However, its most important use is for emergency messages. This channel

must be monitored at all times except when actually using another channel.

It is monitored by the U.S. and Canadian Coast Guards and by other vessels.

Use of channel 16 for hailing must be limited to initial contact only. Calling

should not exceed 30 seconds, but may be repeated 3 times at 2-minute inter-

vals. In areas of heavy radio traffic, congestion on channel 16 resulting from its

use as a hailing channel can be reduced significantly in U.S. waters by using

channel 9 as the initial contact (hailing) channel for non-emergency communi-

cations. Here, also, calling time should not exceed 30 seconds but may be

repeated 3 times at 2-minute intervals.

Prior to making contact with another vessel, refer to the channel charts in this

manual, and select an appropriate channel for communications after initial con-

tact. For example, Channels 68 and 69 are some of the channels available to

non-commercial (recreational) boaters. Monitor your desired channel in advance

to make sure you will not be interrupting other traffic, and then go back to either

channel 16 or 9 for your initial contact.

When the hailing channel (16 or 9) is clear, state the name of the other vessel

you wish to call and then “this is” followed by the name of your vessel and your

Station License (Call Sign). When the other vessel returns your call, immedi-

ately request another channel by saying “go to,” the number of the other chan-

nel, and “over.” Then switch to the new channel. When the new channel is not

busy, call the other vessel.

After a transmission, say “over,” and release the microphone’s push-to-talk

(PTT) switch. When all communication with the other vessel is completed, end

the last transmission by stating your Call Sign and the word “out.” Note that it is

not necessary to state your Call Sign with each transmission, only at the begin-

ning and end of the contact.

Remember to return to Channel 16 when not using another channel. Some

radios automatically monitor Channel 16 even when set to other channels or

when scanning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon PHANTOM - PS2000 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon PHANTOM - PS2000 Manual

Product: