603484
36
Zoom out
Zoom in
Previous page
1/188
Next page
CPN700i and CPN1010i Multimedia Chart Plotters Page 37
The Chart Control Icon display duration can be adjusted from Off, 2 sec, 5 sec, 10 sec and
Permanent (default). If Off is selected the Chart Control Icon will not be displayed. If 2 sec,
5 sec, or 10 sec is selected the Chart Control Icon will be displayed for the selected duration.
Tap the touch screen to make the Chart Control Icon reappear. To adjust the duration of the
Chart Control Icon follow the procedure below:
1. Press the
key, tap on Setup Menu.
2. Tap on
GENERAL. The General Setup menu appears.
3. Turn the
rotary knob until CHART CONTROL ICON is highlighted.
4. Tap on
CHART CONTROL ICON.
5. Tap on
SHOWN.
6. The menu shows
Off, 2 sec, 5 sec, 10 sec and Permanent. Tap on the desired duration.
7. Press the
key repeatedly until the menu disappears.
The Chart Control Icon can be adjusted from left side (default) of the Chart display to the
right. To adjust the location of the Chart Control Icon follow the procedure below:
1. Press the
key, tap on Setup Menu.
2. Tap on
GENERAL. The General Setup menu appears.
3. Turn the
rotary knob until CHART CONTROL ICON is highlighted.
4. Tap on
CHART CONTROL ICON.
5. Tap on
LOCATION to select between Left and Right.
6. When the desired location has been selected, press the
key repeatedly until the
menu disappears.
2.1.4 SETTINGS IN GENERAL SETUP MENU
The General Setup menu allows you to customize the display. All selections are listed in the
following table:
Time Setup : Selects the Time Zone offset, enables or disables Daylight Saving time, selects 12 or
24 hour Time Format.
Date Format : Selects the Date format MM-DD-YY (default), DD-MM-YY or YY-MM-DD.
Page Sweep : Selects Animated (default), Normal and Off the page sweep control.
Keypad Beep : Adjusts keypad beep On (default) or Off.
Shuttle Point Enter : ShuttlePoint knob press to enter is user selectable. When set to On (default), pressing
the ShuttlePoint knob in the center will enter or confirm the action. When set to Off,
pressing the ShuttlePoint knob in the center will not produce any effect.
Units of Measure : Units of Measure can be selected for Distance, Speed, Wind Speed, Depth,
Altitude, Temperature, Air Pressure, Oil/Boost Pressure and Fuel:
Distance: selections are Nm (Nautical Miles), SM (Statute Miles), km (Kilom-
eters), Nm+ft, Nm+m. Note when “Nm+ft” is selected if the distance is less than
1.0Nm, feet will be displayed. When “Nm+m” is selected if the distance is less
than 1.0Nm, meters will be displayed. The default setting is Nm.
Speed: selections are kn (knots), mph (miles per hour), km/h (kilometers per
hour). The default setting is kn.
Wind Speed: selections are kn (knots), m/s (meters per second), km/h
(kilometers per hour), bft (Beaufort). The default setting is kn.
Depth: selections are ft (feet), ftm (fathoms) and m (meters). The default setting
is ft.
Altitude: selections are ft (feet) and m (meters).The default setting is ft.
Temperature: selections are °F (Fahrenheit) and °C (Celsius).The default
setting is °F.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon CPN1010i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CPN1010i in the language / languages: English as an attachment in your email.

The manual is 17,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info