Manual Stadler Form Ben (page 13 of 84) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

807163

Zoom out

Zoom in

1/84

forehand and if necessary, clean it with a bit of dish detergent and a clean

cloth. Fill fresh water into the water tank (3), before putting the appliance

back into operation.

•Every 2 weeks: First remove the water tank (3), the lid (7), the cover (16)

and the Water Cube™ (12). Clean the inside of the water tray (10,14,17)

thoroughly with a bit of dish detergent, warm water and a soft, clean

cloth, sponge or brush. Use diluted descaling agent (mix according to the

manufacturer’s instructions) for lime deposits. Then rinse the water tray

(10) thoroughly with cold water and put the water tank (3), the lid (7), the

cover (16) and the Water Cube back in.

•Descaling at least 1x per month. Remove the water tank (3) the lid (7),

the cover (16) and the Water Cube (12). If limescale deposits form in the

water tray (10) we recommend using Stadler Form Cleaner & Descaler

(www.stadlerform.com/accessories). Alternatively, you can use a house-

hold decalcifier or vinegar. Fill a cup with 200 ml of tap water mixed with

descaling agent (mix according to the manufacturer’s instructions). Pour

the liquid carefully into the water tray (10). Be sure that no liquid enters

the air outlet opening (13). This will damage the appliance and will void

any claim to the warranty.

• Let the descaling agent allow to take effect according to manufacturer’s

instructions (approx. 30 min.). Check in the water tray (10) if the limescale

on the ultrasonic membrane (14) has dissolved.

• If limescale residue remains, the ultrasonic membrane (14) can be cleaned

with the help of the cleaning brush (15) (front- and backside). Do not try to

scrape them with a hard object.

• For stubborn limescale, we recommend descaling the appliance several

times in a row.

• To rinse, now fill the cup with 200 ml of tap water and carefully pour the

liquid into the water tray (10). Pour the water out of the appliance at the

front right corner. Repeat the process until there is no more descaling

agent in the water tray (10). Place the Water Cube (12), the lid (7), the

cover (16) and the water tank (3) back into the appliance.

•Regularly as required: For external cleaning, rub with a damp cloth and

then dry thoroughly. If the top of the lid (7) shows water and/or fragrance

deposits, please clean it using a damp cloth and a bit of dish detergent.

•At the end of the season: Before putting away the appliance at the

end of the season, decalcify as described above. Then clean it thoroughly

inside and out and let it dry completely. Insert a new Water Cube (12) and

anticalc cartridge (19, optional) in order for your appliance to be ready for

the start of the next season. Do not put the appliance away with a used

anticalc cartridge in place, as the granules inside will remain moist for a

long time.

Replacement of the anticalc cartridge (optional accessory)

• Please find the recommended replacement intervals in the table (see «Be-

fore setup»).

• Tip: The efficiency of the cartridge can be inspected with a simple test.

Hold a small mirror in the mist for a few seconds. If there are then white

deposits (calcium carbonate) on the mirror, then the cartridge needs

changing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Ben in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Ben Manual

Product: