Manual Stadler Form Ben (page 11 of 84) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

807163

Zoom out

Zoom in

1/84

Before setup: Anticalc cartridge and water hardness (optional ac-

cessory)

The anticalc cartridge reduces the limescale in the water and the undesir-

able emission of limescale particles into the surroundings. Effective for one

to three months, depending on water hardness (see table).

With a water hardness above > 7 ° dH, we recommend the use of

the anticalc cartridge (19) to inhibit lime deposits. Test your water's

hardness (= lime content) with the included testing strip (see page 4). If the

strip shows 2 pink boxes, your water hardness is > 7 ° dH.

1. Dip the testing strips into the water for a second

2. After around one minute, the results can be seen on the testing strips.

Some of the green boxes change colour into pink. The water hardness

is shown by how many boxes turn pink. Example: If three boxes are pink,

then the water hardness is > 14 ° dH.

Important: Soak the anticalc cartridge in a water bath for 24 hours before

the first use (not in the water tank!). The resin has to absorb water to reach

high performance.

The period of time that the cartridge is effective for depends on the hard-

ness of the water.

Number of

pink boxes Water

hardness Degree of

hardness

(°dH)

Cartridge will last for

(with 2.5 liter/day)

Days Liter

0/1 Soft From 4 °dH 140 days approx. 360 L

2Moderately

hard From 7 °dH 70 days approx. 180 L

3Hard From 14 °dH 50 days approx. 120 L

4 Very hard From 21 °dH 25 days approx. 60 L

With a water hardness above 21 ° dH, we can no longer recommend the use

of an ultrasonic air humidifier. We recommend that you use an evaporative

humidifier to increase humidity in your house (e.g. Oskar humidifier made by

Stadler Form).

The unit only works properly with untreated water. Do not use where there

are water softeners and water ionisers in operation. However, Ben may be

operated from a drinking water filter system (e.g. Brita). Should you be un-

sure about the quality or composition of the water in your area, contact the

caretaker or the provider of drinking water.

Setting up / operation

1. Put Ben in the desired location on a flat surface. Connect the power

adapter (1) to the unit (2) and plug the adapter (1) into a suitable socket.

2. Lift up the water tank (3) to the side, out of the way. Unscrew the tank

lid (4) and fill the water tank to the maximum mark (5) with clean, cold

tap water. Then put the tank into the appliance. To do this, position the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Ben in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Ben Manual

Product: