Manual Stadler Form Ben (page 12 of 84) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

807163

Zoom out

Zoom in

1/84

water tank (3) sideways again, diagonal to Ben, and lift the water tank up

and insert it again. Important: Please do not move Ben when it is filled

with water. The water could splash out of the interior tank and into the

electronics.

3. Next, start Ben by pressing the On/Off button (6). The LEDs for the fire-

place effect will then light up, and the mist will be visible as it comes out

of the appliance (7) at variable output controller (8) height.

4. By turning the variable output controller (8), you can adjust the humidifier

output as you wish.

5. If you are disturbed by the brightness of the illuminated mist (in the bed-

room, for example), you can reduce the brightness of the LEDs by pressing

the dimmer button (9). You can choose between three different modes:

• Normal mode (default mode)

• Dimmed mode (push once)

• Lights-out mode (push twice)

• By pushing the dimmer button once more, you can go back into normal

mode.

6. You can also use Ben to fragrance the room. We ask that you be sparing

when dealing with fragrances as too much can lead to malfunctions and

damage to the unit. To use fragrances, remove the water tank (3) from the

unit and trickle the fragrance directly into the water tray (10) (see page 5).

Add a maximum of 2–3 drops of fragrance per full tank of water. Install

the water tank back into the unit.

Tip: Would you like to change the fragrance? Remove the water tank

from the unit, pour the remaining water out and clean the humidifier (see

«Cleaning»). Now Ben is ready to distribute a different fragrance of your

choice around the room. The intensity with which the aroma is diffused

can be adjusted smoothly by sliding the variable output controller.

7. The water level indicator (11) glows red when the water needs to be re-

filled. Remove the water tank (3) and fill it up with tap water. Replace the

water tank. The appliance will resume operation after a few seconds.

8. Would you like to refill the water during operation? You can simply remove

the water tank (3) and fill it up. The unit will operate for around a further

5 to 10 minutes with the water that remains in the system. Put the water

tank back into the unit within this time period and Ben can continue opera-

tion without stopping at all.

Note: Should you see droplets (or other signs of dampness) on or around

the unit, this is condensed water from the humidifier. This means that the

air can no longer absorb the moisture from the humidifier. Please reduce the

humidifier output until you can no longer see any droplets.

Cleaning

Before each piece of maintenance and after every use, turn off the unit

and remove the plug from the plug socket. Before you clean Ben, the power

adapter (1) must be separated from the power adapter connection (2).

Attention: Never submerge the unit in water (danger of short circuiting).

• For hygienic reasons and to ensure proper operation, we recommend the

following cleaning intervals.

•Daily: Fill the water tank (3) with fresh, cold tap water. If the appliance

is not used for several days, empty the water from the water tray (10) be-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Ben in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Ben Manual

Product: