708059
15
Zoom out
Zoom in
Previous page
1/100
Next page
15

EN

Highlight EXPO then press the roller to toggle between the activate and inhibit
settings.
STEP #10

The Gyro function allows you to program the adjustment of up to four gyro gain
values from a variety of switches including the flight mode switch. You can select
the channel the gyro gain is on.

In the Function List rotate the roller to highlight Gyro. Press the roller to access
that screen.

To activate the Gyro function, highlight Inhibit, then press the roller to access the
switch function. Rotate the roller to access the desired gyro control switch. Press
the roller to accept the gyro control switch and access the Gyro gain screen

You can assign the receiver channel the gyro gain is plugged into in this screen.
The governor and the gyro must use two different channels. If the governor
function uses a channel, it will not appear in the gyro list.
Highlight Ch: (channel) then press the roller to access the gyro channel function.
Select the desired channel to plug the gyro gain into and press the roller to accept
the switch. Normally the Gear channel is used.

Rotate the roller to select the desired gain value then press the roller to select the
gain value.
 The displayed value is the corrected gyro value. 0% represents 1.500ms or
OFF with most gyros.
Repeat this for all desired Gain values.
STEP #11

The Governor function adjusts engine rpm when using a Governor or throttle
limiter. You can program the selection of up to four governor values from a variety
of switches including the flight mode switch. Also you can select the channel the
governor controls.
In the Function List rotate the roller to highlight Governor then press the roller to
access that screen.

The Governor function defaults to Inhibit. To activate the Governor function, rotate
the roller to highlight Inhibit; then, press the roller to select the desired control
switch by rotating the roller. Afterwards, press the roller to accept the switch
choice and enter the governor screen.

In this screen you can assign the receiver channel the Governor is plugged into.
The governor and the gyro must use two different channels. If the gyro function
uses a channel, it will not appear in the governor list.
Rotate the roller to highlight Ch: (channel) then press the roller to access that
function. Select the desired channel to plug the governor in to and press the roller
to accept the channel. Normally Aux 2 is used.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info