708059

Spektrum DX8 Manual

13
Zoom out
Zoom in
Previous page
1/100
Next page
13

EN

With the transmitter on and the main or telemetry screen displayed, press the
roller. The Function list displays.
Rotate the roller to highlight Swashplate then press the roller to access.

Highlight the desired function (Aileron, Elevator or Pitch) then press the roller to
access.
Rotate the roller to change the Swashplate value. (Positive and negative values are
available and allow you to reverse that function.) Press the roller to accept. Repeat
the above process for all three cyclic inputs (aileron, elevator and pitch).
Swashplate values increase or decrease the overall control travel of the
selected channel. For example if you increase Pitch value, the travel of all three
servos that control pitch increases. If you increase aileron value, the aileron and
pitch servos increase. Increasing or decreasing this value affects the travel of that
function and not the individual servo.

Rotate the roller to highlight EXPO then press the roller to toggle between Inh and
Act. Note: Swash EXP compensates for the non-proportional rotational output of
the servo arms. We recommend you always have this activated.

Highlight E-ring then press the roller to toggle between Inh and Act.
STEP #7

The Dual Rate and Exponential functions allow you to program up to three control
rates and select them independently or with a single switch. Dual Rates and
exponentials are available on the aileron, elevator and rudder channels. Positive
expo values reduce control sensitivity around center with no effect on maximum
travel. We recommend using positive values. Negative exponential values
increase sensitivity around neutral and are seldom used.

In the Function List rotate the roller to highlight D/R and Expo. Then press the
roller to access the D/R and Expo screen.

Rotate the roller to highlight the channel function, then press the roller to select
the function. Next rotate the roller to select the aileron, elevator or rudder channel.
Then press the roller to accept that channel.

Rotate the roller to highlight SW (switch) at the bottom of the screen then press
the roller to access the switch options. Rotate the roller to select the desired
switch then press the roller to activate that switch.
 By assigning multiple channels to the same switch, you can use a single
switch to affect the dual and exponential rates of multiple channels.

Move the switch displayed at the bottom of the screen to change the Pos to one
of its three positions. When you make D/R or Expo adjustments, the values are
assigned to the presently selected position and are automatically active when the
switch is in that position (Pos 0, 1or 2).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info