Manual Spektrum DX8 (page 12 of 100) (English)

708059

Zoom out

Zoom in

1/100



Rotate the roller to highlight Servo Setup then press the roller to access the Servo

Setup screens. The Travel Adjust screen automatically appears. Use the roller to

access the Reverse option.

Turn roller to highlight channel. Press roller to access channel. Turn roller to

select option. Press roller to accept option.

Highlight the REV NOR Graphic at the bottom of the screen. Press the roller to

select REV or NOR.

Rotate the roller to highlight the channel function. Then press the roller to access

the function. Rotate the roller to select the next channel to reverse, then press the

roller. Repeat this process to complete reversing for all necessary channels.



In the Servo Setup screen rotate the roller to highlight Travel then press the roller.

Now rotate the roller until Sub-Trim appears, then press the roller to enter the

Sub-Trim function.

Rotate the roller to select the channel then press the roller to select that channel.

Rotate the roller to access the channel you want to adjust then press the roller to

accept that channel.

Rotate the roller to highlight the value at the bottom of the screen then press the

roller to access the Sub-Trim Value. Rotate the roller to adjust the Sub-Trim value

for the selected channel. Then press the roller to accept



In the Servo setup function, rotate the roller to highlight Travel then press the

roller to select the function.

Highlight the channel function then press the roller to access the function.

Rotate the roller to select the channel to adjust then press the roller to accept that

channel.

Highlight the values at the bottom of the screen and press the roller to select

them. When you center the corresponding stick both values are highlighted

and adjusted simultaneously. Moving the stick or switch in the desired position

allows you to independently adjust that direction of travel. With the desired value

(s) highlighted rotate the roller to adjust the travel adjust for the selected channel.

Then press the roller to accept the values.

STEP #6



In the Swashplate screen you can adjust the direction and amount of travel for

the aileron, elevator and pitch functions. To achieve the correct travel direction

for Aileron, Elevator and Pitch, ﬁrst use the reversing function (step #5 above)

to set the servo direction on the aileron, elevator and pitch channels. Set it so

that aileron input on the transmitter’s stick tilts the swashplate right and left, an

elevator input tilts the swashplate tilts forward and backward, and a pitch input

raises and lowers the swashplate.

Then in the Swashplate screen, you can adjust swashplate values positively or

negatively to achieve the overall correct travel direction for aileron, elevator and

pitch. An E-ring function also prevents servo over-travel when simultaneous

extreme aileron and elevator inputs are given. This screen also allows an Expo

function that smoothes out the effect of the servo’s rotation at extreme negative

and positive swashplate values. You should activate the Expo function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spektrum DX8 Manual

Product: