708059
17
Zoom out
Zoom in
Previous page
1/100
Next page
17

EN
STEP #14


You can program the timer to start when the throttle is raised above a
preprogrammed position.
To reset the timer, from the main screen press the Clear button.

In Function List rotate the roller to highlight Timer. Press the roller to access the
Timer screen.

Rotate the roller to highlight Mode then press the roller to access the Mode
function. Rotate the roller to select Inhibit, Count Down or Stop Watch. When the
desired timer mode is selected, press the roller to accept the mode type.
To Program a Time
Rotate the roller to highlight Time then press the roller to access the Time
function. You can highlight the seconds or minutes. Press the roller to access
minutes or second. Rotate the roller to select the desired time. Press the roller
to accept.

Rotate the roller to highlight Start then press the roller to access the Start
function. Select Throttle or Throttle 1-Time then press the roller.
Throttle 1-time - The timer starts when you exceed the programmed throttle
position. It continues regardless of the throttle position.
Throttle - The timer starts when you go above the programmed throttle position.
Anytime you lower the throttle below the programmed position, the timer pauses
then continues when you raise the throttle above that position. This is useful for
flying electric models where the motor runtime not the flight time is important.
Pos appears below Start in the Timer screen. This value is the stick position
where the throttle activates the timer. Rotate the roller to highlight Stick. Press
the roller to access the Stick values. The value is adjustable from 0 to 100% and
correlates to the actual throttle stick position. Rotate the roller to select the desired
Stick value then press the roller to accept
To select the warning type, highlight Tone then press the roller. Rotate the roller to
select Inhibit, Tone, Vibe or Tone and Vibe. Press the roller to accept the setting.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info