Manual Spektrum DX8 (page 9 of 100) (English)

708059

Zoom out

Zoom in

1/100



STEP #9



You can use aileron differential to reduce unwanted yaw characteristics during a

roll. In aerobatic airplanes adjusting differential provides an axial roll (minimum

displacement of yaw during a roll). You can program up to three Differential

values and assign them to a switch. Positive + and negative – differential is

available. However, more up-aileron travel is normally required than down

aileron.

 The Differential function is only available if Dual Aileron, Flaperon, 2

aileron 1 ﬂap, 2 ailerons and 2 ﬂaps or Elevon is selected in Wing Type.



In the Function List rotate the roller to highlight Differential then press the roller.

Differential defaults to Inhibit. Press the roller to highlight Inhibit then select one

of the following switch positions:

On - Always on

Ail D/R - Aileron Dual rate switch

Ele D/R - Elevator Dual rate switch

Rud D/R - Rudder dual rate switch

F Mode - Flight Mode switch

Flap - Flap switch

Aux 2-Auxiliary 2

Gear - Gear Switch

Mix-Mix switch

Press the roller to accept the desired switch. The differential adjustment screen

displays.

Highlight the desired differential position/value and press the roller to access.

Rotate the roller to change the value then press the roller. Repeat for all desired

switch positions.

Positive differential values provide more up than down aileron travel. Negative

differential values provide more down than up travel.

STEP #10





You can program the timer to start when the throttle is raised above a

preprogrammed position.

To reset the timer, from the main screen press the Clear button.



In Function List rotate the roller to highlight Timer. Press the roller to access the

Timer screen.



Rotate the roller to highlight the Mode function then press the roller to access

the Mode function. Rotate the roller to select Inhibit, Count Down or Stopwatch.

When the desired timer mode is selected, press the roller to accept the mode type.

To Program a Time

Rotate the roller to highlight Time then press the roller to access the Time

function. You can highlight the seconds or minutes. Press the roller to access

minutes or second. Rotate the roller to select the desired time. Press the roller to

accept.



Rotate the roller to highlight Start then press the roller to access the Start

function. Select Throttle or Throttle 1-Time then press the roller.

Throttle 1-time - The timer starts when you exceed the programmed throttle

position. It continues regardless of the throttle position.

Throttle - The timer starts when you go above the programmed throttle position.

Anytime you lower the throttle below the programmed position, the timer pauses

then continues when you raise the throttle above that position. This is useful for

ﬂying electric models where the motor run time, not the ﬂight time, is important.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spektrum DX8 Manual

Product: