708059
8
Zoom out
Zoom in
Previous page
1/100
Next page
8

EN
STEP #7

The Throttle Cut function (normally used on gas or glow powered aircraft) allows
you to use the trainer button, mix switch or the Right or Left trimmer to shut off
an engine. Activating the programmed switch drives the throttle channel to its
programmed position regardless of the throttle stick position, powering down the
engine.

In the Function List rotate the roller to highlight Throttle Cut. Press the roller to
access the Throttle Cut screen.
Press the roller to highlight Inhibit. Rotate the roller to select the desired switch
to cut the throttle (Trainer, Gear, L trim, R trim or Mix). Press the roller to program
the selected switch.
Rotate the roller to highlight the Value and press the roller to access. A 0% value
gives low throttle, low trim. Adjust the value to the desired throttle cut position.
To test the throttle cut function, activate the programmed switch and note the
throttle servo position or the position of the throttle channel in the servo monitor.
STEP #8

Typically, you can use the Throttle Curve function to change the throttle response.
You can program a throttle that responds more proportionally to your input or
adjust the throttle response sensitivity when hovering or torque rolling. You can
program a single curve that is always on (ON). Or you can program up to three
curves and select them via a programmed switch. The Expo function can then
smooth out the Throttle curve.

In the Function List rotate the roller to highlight Throttle Curve. Press the roller to
access the Throttle Curve screen.

Rotate the roller to highlight “Inhibit”. Press the roller to access the switch options.
Choose the desired switch to change to different throttle curves. Alternatively, you can
select ON if only one curve is desired as always active.

With the switch listed at the bottom of the screen in the position desired for this
curve, rotate the roller to highlight one of the five available throttle curve values
(Low, 25%, 50%,75, High). Press the roller to access.
Rotate the roller to adjust the selected point to the desired output. Note the
position on the graph.
Repeat this for all desired points.
 if you set a switch position in Throttle Curve, move the switch so you can
adjust it. Change the throttle curve values for those switch positions.

Rotate the roller to highlight EXPO. Select Inh or Act to inhibit or activate the Expo
function.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info