708059
7
Zoom out
Zoom in
Previous page
1/100
Next page
7

EN
7
Rotate the roller to highlight the value at the bottom of the screen then press the
roller to access the Sub-Trim Value. Rotate the roller to adjust the Sub-Trim value for
the selected channel. Then press the roller to accept.

In the Reversing screen rotate the roller to highlight Reverse then press the roller.
Now rotate the roller until Travel appears. Press the roller to enter Travel function.
Highlight the channel then press the roller to access. Rotate the roller to select
the channel to adjust then press the roller to accept that channel.
Highlight the values at the bottom of the screen. When you center the
corresponding stick both values are highlighted and adjusted simultaneously.
Moving the stick or switch in the desired position allows you to independently
adjust that direction of travel. With the desired value (s) highlighted rotate the
roller to adjust the travel value for the selected channel. Then press the roller to
accept the value.
STEP #6

The Dual Rate and Exponential functions allow you to program up to three
control rates and select them independently or with a single switch. Dual Rates
and exponentials are available on the aileron, elevator and rudder channels.
Positive expo values reduce control sensitivity around center with no effect on
maximum travel. We recommend using positive values. Negative exponential
values increase sensitivity around neutral and are seldom used.

In the Function List rotate the roller to highlight D/R and Expo. Then press the
roller to access the D/R and Expo screen.

Rotate the roller to highlight the channel function then press the roller to select
the function. Next rotate the roller to select the aileron, elevator or rudder
channel. Then press the roller to accept that channel.

Rotate the roller to highlight SW (switch) at the bottom of the screen then press
the roller to access the switch options. Rotate the roller to select the desired
switch then press the roller to activate that switch.
 By assigning multiple channels to the same switch, you can use a single
switch to affect the dual and exponential rates of multiple channels.

Move the switch displayed at the bottom of the screen to change the Pos to
one of its three positions. When you make D/R or Expo adjustments, the values
assign and are automatically active when the switch is in that position (Pos 0,
1or 2).

Confirm you have chosen the desired channel and selected the switch position.
Rotate the roller to highlight the D/R or Expo values then press the roller to
access that value. When you center the corresponding channel’s control stick,
both values are highlighted. Moving the control stick to its endpoint causes one
value to be highlighted. This allows the D/R or Expo value in that direction only
to be changed. With the desired value selected, rotate the roller to select the
desired D/R or Expo value.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 User Manual - English - 42 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info