708059
26
Zoom out
Zoom in
Previous page
1/42
Next page
26


Rotate the roller to highlight EXPO then press the roller to access the Throttle
Curve Expo function. Select Inh or Act to inhibit or activate the Expo function then
press to accept.

The DX8 features a 5-point throttle curve. You can assign up to four separate
throttle curves. A graph displays at the left side of the screen to aid in adjusting
throttle curves. An Expo function is also available that smoothes out the curve.

With the transmitter on and the main or telemetry screen displayed, press the
roller. The Function list displays.
Rotate the roller to highlight Throttle Curve then press to access that screen.

Highlight the desired flight mode at the top of the screen then press the roller to
select. The selected flight mode will darken confirming your selection.
N= Normal
1= Stunt 1
2= Stunt 2
H= hold

Move the flight mode switch in the position you wish to adjust. Rotate the roller
to highlight one of the five available throttle curve values (Low, 25%, 50%, 75%,
High). Press the roller to access that value.
Rotate the roller to adjust the selected point to the desired output position. Note
the position on the graph at the left of the screen.
Repeat this for all desired points.

Rotate the roller to highlight EXPO then press to access the Throttle Curve Expo
function. Select Inh or Act to inhibit or activate the Expo function. Press the roller
to accept.

The DX8 flap system offers up to three programmable flap and elevator positions
(normal, mid and land). You can assign them to a variety of switches. You can
program a Speed function to slow flap and elevator compensation travel for a
scale effect. A graphic display on the left side of the Flap System screen provides
a visual display of servo position aiding in setting up and adjusting the flaps.
Note: The Flap function is only available on wing types with flaps. (see
Wing Type page 15)

With the transmitter on and the main or telemetry screen displayed, press the
roller. The Function list displays.
EN
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 Quick start guide - English - 100 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info