708059

Spektrum DX8 Manual

25
Zoom out
Zoom in
Previous page
1/42
Next page
25


The Throttle Cut function allows you to shut off an engine with the Trainer switch,
Gear switch or the Right or Left trimmer. When you activate the programmed
switch, the throttle channel is driven to it’s preprogrammed value normally off.
This effectively kills the engine. Release the programmed throttle cut switch/
trimmer, and normal throttle operation resumes.

With the transmitter on and the main or telemetry screen displayed, press the
roller. The Function list displays.
Rotate the roller to highlight Throttle Cut then press to access the Throttle Cut
screen.
Highlight Inhibit then press the roller to access the switch options.
Rotate the roller to the desired switch to cut the throttle (Trainer, Gear, Mix , L trim
or R trim) then press the roller to program that switch.
Program a Throttle Cut position. Note that 0%= low throttle, mid trim and
negative values are available. To test the Throttle Cut function, activate the
programmed switch. Note the throttle servo position or the position of the throttle
channel in the servo monitor. The system should drive the servo position to the
low throttle position when you activate Throttle Cut.

The Throttle Curve function allows throttle output vs. input positions to be
adjusted. This is typically used to alter the throttle response to give a linear rate
or to adjust the throttle response sensitivity when hovering or torque rolling. You
can program a single curve (switch to On) or up to three curves and select them
via a programmed switch. The screen displays a graphic 5-point throttle curve on
its left side to aid in selecting throttle curve values. An Expo function is available
that smoothes out the Throttle curve.

With the transmitter on and the main or telemetry screen displayed, press the
roller. The Function list displays.
Rotate the roller to highlight Throttle Curve then press the roller to access the
Throttle Curve screen.

Rotate the roller to highlight Switch then press the roller to access the switch
options.
Choose the desired switch to change to different throttle curves or select On if you
only want one curve to always be active.

With the switch listed at the bottom of the screen in the position desired for this
curve, rotate the roller to highlight one of the five available throttle curve values
(Low, 25%, 50%,75, High). Press the roller to access.
Rotate the roller to adjust the selected point to desired output. Note the position
on the graph at the left of the screen.
Repeat this for all desired points.
Note: if you select a switch position in Throttle Curve, move the switch
to the remaining position(s) and adjust the throttle curve values for those
switch positions.
EN
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 Quick start guide - English - 100 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info