Manual Spektrum DX8 (page 24 of 42) (English)

708059

Zoom out

Zoom in

1/42





Rotate the roller to highlight Sw (switch) then press to access the switch options.

Select the desired switch to change the dual rate for that channel or inhibit then

press the roller to make it active.

Note: You can assign multiple channels to a single switch to affect the

dual and exponential rates of all.



Note Pos: Pos 0 in the center of the screen. Move the switch displayed at the

bottom of the screen to one of three positions from 0,1,2. When you make D/R or

Expo adjustments, values are assigned and automatically active when the switch

is in that position (Pos 0, 1or 2).



Conﬁrm that the desired channel and switch position are selected. Rotate

the roller to highlight the D/R or Expo value then press to access. When the

corresponding channel’s control stick is centered both values are highlighted. If

you move the control stick to its endpoint, only one value will be highlighted.

This allows the D/R or Expo value in that direction only to change. With the

desired value selected, rotate the roller to select.



The Differential function provides precise adjustments of up/down aileron travel

of each aileron (or elevon if Delta wing is activated). Typically, you can use

Aileron differential to reduce unwanted yaw characteristics. In aerobatic airplanes

adjusting differential provides an axial roll (minimum displacement of yaw

during a roll). You can program up to three Differential values and assign them

to a switch. Note that positive + and negative – differential is available; however,

normally more up aileron travel is required than down aileron.

Note: The Differential function is only available if Dual Aileron, Flaperon,

2 ailerons 1 flap, 2 ailerons 2 flaps or Elevon is selected in Wing Type

(see page 13) and each aileron servo is controlled by its own channel.



With the transmitter on and the main or telemetry screen displayed, press the

roller. The Function list displays.

Rotate the roller to highlight Differential then press.

Differential defaults to Inhibit. Press the roller to highlight Inhibit then select one

of the following switch positions:

- Off

 - Always on

- Gear Switch

 - Flap switch

 - Aileron Dual rate switch

Ele D/R - Elevator Dual rate switch

Rud D/R - Rudder dual rate switch

 - Flight Mode switch

 - Aux 2 switch

 - Mix switch

Press the roller to accept the desired switch. The differential adjustment screen

displays.

Highlight the desired differential position/value and press the roller to access.

Rotate the roller to change the value then press the roller. Repeat for all switch

positions desired.

Positive differential values provide more up than down aileron travel. Negative

differential values provide more down than up travel. The differential values

screen also allows you to select/change switch positions. Use the roller to

highlight SW then rotate to change to the desired switch position or inhibit the

function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX8 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX8

Spektrum DX8 Quick start guide - English - 100 pages

Spektrum DX8 User Manual - German - 42 pages

Spektrum DX8 User Manual - French - 42 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spektrum DX8 Manual

Product: