Manual Spektrum DX18 - SPM18000 (page 27 of 42) (English)

726853

Zoom out

Zoom in

1/42

27SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

Range Test

The Range Test function reduces the power output. This allows

for a range test to conﬁ rm the RF link is operating correctly.

Perform a range check at the beginning of each ﬂ ying session

to conﬁ rm system operation.

To Access the Range Test screen

With the transmitter on and the main or telemetry screen

displayed, press the roller. The Function list displays.

Rotate the roller to highlight Range Test then press the roller to

access the Range Test function.

With the Range Test screen displayed, push and hold the trainer

button. The screen displays Reduced Power. In this mode the RF

output is reduced allowing for an operational range test of your

system.

If you let go of the trainer button, the transmitter will go back to

Full Power.

Range Testing the DX18

1. With the model restrained on the ground, stand 30 paces

(approx. 90 feet/28 meters) away from the model.

2. Face the model with the transmitter in your normal ﬂ ying

position and place the transmitter into Range Test mode

(see above) and push the trainer button reducing the power

output.

3. Operate the controls. You should have total control of your

model with the transmitter in Range Test mode.

4. If control issues occur contact the appropriate Horizon

Product Support ofﬁ ce for assistance.

5. If performing a range test while a telemetry module is ac-

tive, the display will show ﬂ ight log data.

Timer

The DX18 Timer function allows you to program a countdown

timer or stop watch (count up timer) to display on the main

screen. An alarm sounds when the programmed time is

reached. You can program the timer to start using the assigned

switch position or automatically when throttle is raised above a

programmed position. Two independent timers can be set up as

desired per model. An internal timer that shows run time for a

speciﬁ c model displays on the Main Screen. A total system timer

is also available.

Telemetry

Telemetry is in both the system setup and the function list so you

can access the telemetry functions from either list.

You must power off the receiver and transmitter, then power

them both on to reset the telemetry data. You can reset min/max

values by pressing the CLEAR button

NEVER change Telemetry settings when the aircraft is powered

on. There is a brief interruption in RF output when exiting the

Telemetry screen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX18 - SPM18000 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spektrum DX18 - SPM18000

Spektrum DX18 - SPM18000 User Manual - German - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spektrum DX18 - SPM18000 Manual

Product: