733462
28
Zoom out
Zoom in
Previous page
1/60
Next page
23
WARNING: Securely clamping the wheel with a cam action
retention device takes considerable force. If you can fully close
the cam lever without wrapping your fingers around the seat
stay or chain stay for leverage, the lever does not leave a clear
imprint in the palm of your hand, and the serrations on the
wheel fastener do not emboss the surfaces of the dropouts, the
tension is insufficient. Open the lever; turn the tension adjusting
nut clockwise a quarter turn; then try again. See also the first
WARNING in this Section, p. 18.
(8) If you disengaged the brake quick-release mechanism in 3. c. (2) above,
re-engage it to restore correct brake pad-to-rim clearance.
(9) Spin the wheel to make sure that it is centered in the frame and clears the
brake pads; then squeeze the brake lever and make sure that the brakes are
operating correctly.
B. Seat post cam action clamp
Some bikes are equipped with a cam action seat post binder. The seat post
cam action binder works exactly like the traditional wheel cam action fastener
(Section 4.A.2) While a cam action binder looks like a long bolt with a lever on
one end and a nut on the other, the binder uses an over-center cam action to
firmly clamp the seat post (see fig. 8a).
WARNING: Riding with an improperly tightened seat post can
allow the saddle to turn or move and cause you to lose control
and fall. Therefore:
1. Ask your dealer to help you make sure you know how to correctly
clamp your seat post.
2. Understand and apply the correct technique for clamping your
seat post.
3. Before you ride the bike, first check that the seat post is securely
clamped.
Adjusting the seat post cam action mechanism
The action of the cam squeezes the seat collar around the seat post
to hold the seat post securely in place. The amount of clamping force is
controlled by the tension adjusting nut. Turning the tension adjusting nut
clockwise while keeping the cam lever from rotating increases clamping
force; turning it counterclockwise while keeping the cam lever from rotating
reduces clamping force. Less than half a turn of the tension adjusting nut
can make the difference between safe and unsafe clamping force.
WARNING: The full force of the cam action is needed to clamp the
seat post securely. Holding the nut with one hand and turning the
lever like a wing nut with the other hand until everything is as tight
as you can get it will not clamp the seat post safely.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Specialized 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Specialized 2007 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Specialized 2007

Specialized 2007 User Manual - German - 60 pages

Specialized 2007 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info