744243
28
Zoom out
Zoom in
Previous page
1/53
Next page
GB 28
Position the air control handle in the middle by hand (about 50%)
Move the selector switch to automatic
The LED must light up and the air control lever must move to the right.
If the lever moves to the left first, swap the white and red wires on the
control with each other.
After a maximum of 1 minute, the air control lever must move to the left.
If not, swap the blue and brown wires on the control with each other and
repeat the self test.
Open the fire door, the air control lever must move to the right.
End of the self test. You can now fire-up the stove.
If no fire is started, approx. 10 minutes after closing the door on, the air
control lever moves back to the left to 0%.
3.3 FUNCTION OF THE ROTARY-BASE
Installation of a rotary base can only be executed at the top and must be
stated when ordering. The stove is can rotate through 180°, 90° to the
left and right respectively (Sino L 120 ° rotatable, 60° to the right and left
respectively Fig. 24).
To allow the Senso S stove to rotate, loosen the adjustment bolt/the stop
(Fig. 27). This is located on the foot plate. Now you can turn the stove in
the desired position. To fix the stove, turn the adjustment screw/the lock
(Fig. 27) again.
On some models, the transport lock has to be removed in advance (Fig.
25). This is located at the rear at the bottom. To remove the transportation
safety device, remove the cylinder head screw (Fig. 25) with a wrench size
5 hexagon key (this is included with the stove).
Finally, remove the transportation safety device (Fig. 26).
Fig. 24
60° to the left Normal position 60° to the right
Transport safety device
Cylinder head screw M6
Hexagon key, wrench size 5
Stop
Fig. 25
Fig. 26
Fig. 27
Example of Sino L:
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Passo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Passo in the language / languages: English as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Passo

Spartherm Passo User Manual - German - 52 pages

Spartherm Passo User Manual - Dutch - 53 pages

Spartherm Passo User Manual - Dutch - 44 pages

Spartherm Passo User Manual - French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info