810449
16
Zoom out
Zoom in
Previous page
1/28
Next page
GB 16
2.13 CHANGING THE DOOR STOP
If the door stop is to be changed, this is also possible after the overall
system has been completed. For this, a new door must be ordered with
specification of the order number, which then can be replaced thanks to
the universal frame.
1. Removal of the „old“ door
a.) First, remove the securing clip on the upper pivot hinge.
b) Then open the door as far as possible and deactivate design A1. To do
this, tighten the grub screw that is located on the bottom on the hinge
side with an Allen key.
Then take the tiled stove door out of the tiled stove - to do this lift the door
on the hinge side and pull it downwards and forwards.
2. Replacement of locking pin
c) Use an open-end wrench to dismount the locking pin.
d) Mount the locking pin on the opposite side, where a bore is provided.
3. Insertion of the „new“ door
Insert the „new“ door - to do this, slide the door with the upper pivot
hinge into the provided bores. Then open the door 90° and fit the lower
pivot hinge (hexagonal) into the provided bore.
e) Reactivate design A1. To do this, unscrew the grub screw that is located
on the bottom on the hinge side with a 3 mm Allen key.
Now check the door for proper function! If the door does not close on its
own, it must be readjusted. If the door does not close on its own, operation
is not permitted.
f) Finally, reinsert the securing clip on the upper pivot hinge.
a+f)
c) d)
b+e)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spartherm Nova E H2O at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spartherm Nova E H2O in the language / languages: English as an attachment in your email.

The manual is 3.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spartherm Nova E H2O

Spartherm Nova E H2O User Manual - German - 28 pages

Spartherm Nova E H2O User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info